10 Mazda3 Sedan, 2.0l 4 Cylinder, Auto, Cloth, Pwr Equip, Cruise, Clean 1 Owner! on 2040-cars

Auto blog

Mazda to use rotary engine as a range-extender with its first electric vehicle

There's more news from Mazda at the Tokyo Motor Show, where the brand made a big splash, including new developments in its never-ending rotary engine saga. First, Mazda execs confirmed that the Japanese automaker will bring back the rotary engine as a range-extender and battery juicer for its first electric vehicle in 2019. But secondly, the company won't have a rotary-powered successor to its RX-7 and RX-8 sportscars in time for the company's centennial anniversary in 2020. Autoblog previously confirmed that Mazda is planning to have an EV in 2019 that will be available in both pure electric and range-extending versions. Now, the Australian website Motoring reports that the global EV will feature a powertrain similar to the experimental Japan-only Mazda2 (Demio) EV, which used a single-rotor engine as a generator to power the battery pack and increase its driving range. The publication says Mazda plans to release a series of plug-in hybrids based on existing models around 2020, then a pure electric car co-developed with Toyota and Denso in 2021 as part of the EV Common Architecture Spirit Company joint venture. A Mazda spokesman tells Autoblog the company couldn't confirm any details about future products. Meanwhile, enthusiasts shouldn't wait for a rotary-based production version of Mazda's RX-Vision concept from 2015. Motoring cites two executives who explain that the company simply lacks the capital necessary to invest in developing the new model in time for its 2020 centennial. Mazda debuted its rotary engine 50 years ago in the Cosmo Sport in part as a way to stand out from its larger Japanese competitors. The engine, which uses a spinning three-tipped rotor in place of pistons, is smaller and lighter than conventional piston engines, with a greater power-to-weight ratio and quieter, smoother operation. But it delivers less fuel economy and higher emissions — two weaknesses that could be improved via a stop-start system Mazda has developed, based on a pair of U.S. patents. The company has also been hard at work developing its next-generation Skyactiv-X engine, which uses highly precise combustion ignition technology to deliver significant gains in fuel economy and power.Related Video:

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

2014 Mazda6: June 2013

The 2014 Mazda6 is our most recent addition to the Autoblog long-term fleet, and we spent the month of June getting to know our Soul Red tester, generally enjoying the honeymoon phase of this twelve-month relationship. During June, the Mazda6 spent the majority of its time with director of photography Drew Phillips, who in addition to putting together this pretty gallery of our rakish long-term car, had a lot to say about it as a daily driver.
You see, not too long before Mazda delivered our long-term 6, Drew bought a 2014 CX-5 crossover to support his growing family. The CX-5 was the first vehicle to use Mazda's full suite of Skyactiv technologies, and we've generally enjoyed the good-to-drive CUV. A lot of that CX-5 goodness lies beneath the more shapely lines of this sleek Mazda6 sedan, so it's only fitting that Drew had a lot of comparisons between Mazda's two housemates during his month behind the wheel.