Great Buy! Popular Package Pwr Windows Pwr Locks A/c Automatic on 2040-cars

Auto blog

Mazda CX-5 in auto-brake accident on Japanese test drive

As we slowly march towards a world where our cars will drive for us, there will be mishaps. Systems will act up, not behave has intended or we'll simply forget to turn them on. We all remember when Volvo tested the S60's City Safety system. Now Mazda has had an issue of its own.
During a test of a Mazda CX-5's Smart City Brake Support on a dealership lot in Japan, a prospective customer and a dealership employee were injured when they hit a urethane barrier used for testing the system. According to Bloomberg, which spoke with the Saitama Prefectural Police, the impact with the barrier left the customer with an injured neck while the dealership employee suffered a fractured arm. Considering the injuries, we imagine this wasn't a small barrier.
"For any safety function, it's impossible to be 100-percent free of accidents. These technical functions aren't always the easiest to understand," IHS Automotive auto parts analyst, Hiroshi Ataka told Bloomberg.

Mazda and Clemson collaborate on Deep Orange 3 concept

There are school projects, and then there's the Mazda Deep Orange 3 Concept Car, a one-off built by Clemson University automotive engineering students and designed by Frederick Naaman from the Art Center College of Design in Pasadena. Clemson students unveiled the chassis at the 2012 SEMA show in Las Vegas, although this is the first showing of the car fully clothed.
Sporting a unique hybrid powertrain that can automatically switch between front-, rear-, and all-wheel drive. A gas-powered engine handles the fronts, while the rears are powered by an electric motor and a battery pack. The Deep Orange 3 also has an unusual three-plus-three layout, making it a much cooler version of your parent's old Vista Cruiser. The exterior sheetmetal clearly follows Mazda's established design language, and looks like it could easily pass for a five-door version of the Shinari Concept. It really is a great looking vehicle.
The Deep Orange 3 was part of Clemson's graduate-level auto engineering program, and is a regular partnership between the east coast school and the Pasadena-based design college's students. Clemson, Art Center and Mazda will be showing the Deep Orange 3 at the Center for Automotive Research Management Briefing Seminars in Traverse City, MI, from August 5 to August 8. Click through for a press release from Clemson University.

Mazda is developing gas and diesel inline-six engines

Once the favored engine configuration for luxury and high-performance cars, the inline-six suffered a bit when the transverse (east-west) engine configuration became popular during the shift to front-wheel drive cars. The packaging benefits are obvious – no driveshaft or transmission intruding on passenger space or rear differential on cargo volume, plus turning the engine 90 degrees meant the front of the car could be shorter. But the inline-six is slowly, slowly crawling out of near-obsolescence, notably in BMW, Jaguar-Land Rover and Mercedes-Benz products. Add Mazda to that mix: An investor report first spotted by Jalopnik and confirmed by Mazda reveals that the company is developing a Skyactiv-X and Skyactiv-D inline-six that will be installed longitudinally (north-south) in a new "Large Architecture" platform. Before reading any further, let's catch up on the Skyactiv-X and -D technologies. The former basically burns gasoline like diesel, providing some benefits and advantages of both types of combustion - here's an explainer on how that all works. We drove a prototype 2.0-liter Skyactiv-X 4-cylinder engine in a Mazda3 mule, too. And the Skyactiv-D series of engines is a comparatively typical turbodiesel. Mazda has a 2.2-liter turbodiesel inline-4 that has had a long and convoluted development and certification process, but is finally showing up in the 2019 CX-5. Since Mazda has implemented these technologies in existing four-cylinder engines, we would assume that the new Skyactiv engines will be "modular" – that is to say, they'll essentially be the existing engines with two extra cylinders, rather than an entirely new design. Jaguar-Land Rover is doing a similar thing with its Ingenium engine family. Assuming the Mazda engines will be modular would mean they'll be roughly 3.0-liter units, which is a common displacement for modern inline-sixes. And as we mentioned eariler, they'll be arranged longitudinally, unlike any other Mazda save the MX-5 Miata (and the long-departed rotaries), in a new vehicle architecture. As part of a medium-term plan over the next six years, Mazda will develop some unspecified vehicles on what it calls the "Large Architecture". These vehicles will have 48V mild hybrid and PHEV capabilities, and be able to use a version of Mazda's i-Activ AWD system. Why do this at all?