4dr Hb Auto Sport Low Miles Hatchback Automatic Gasoline 1.5l I4 Fi Dohc 16v Sil on 2040-cars

Auto blog

Mazda halts Mazda3 sales for fuel tank problem

Mazda is issuing a stop sale and recall on 14,406 examples of the 2015-2016 Mazda3 in the US with build dates between May 21, 2015, and August 24, 2015, due to a possible fuel leak. There are no reports or accidents or injuries from this problem. According to the company, a defective fuel shut-off valve can allow gasoline to move from the tank and fill the charcoal emissions canister. If it gets too full, there can be a leak, which obviously carries the risk of a possible fire. The engine might stall, as well. Affected owners will be notified to bring their Mazda3 in "as soon as possible." Dealers will inspect the vehicles, and if a problem is found, the fuel tank and charcoal emissions canister will be replaced. During the downtime, customers will get a free rental or loaner car, as well. Those who are particularly concerned can also call Mazda roadside assistance to have their vehicle delivered for the check and possible repair. Related Video: Mazda Issues Stop Sale and Stop Delivery for Mazda3 Fuel Tank Recall WASHINGTON, DC (October 2, 2015) – Mazda Motor Corporation will conduct a Safety and Emission Recall Campaign for certain 2015-2016 Mazda3 vehicles (built from May 21, 2015 through August 24, 2015), which could have a safety-related problem. A defect in the fuel shut-off valve may allow fuel to flow from the fuel tank into the charcoal emissions canister. With this condition, the check engine light may illuminate, and if the fuel exceeds the canister capacity, fuel leakage could occur, increasing the risk of a fire and/or engine stalling. Approximately 14,270 vehicles in the U.S. and 136 vehicles in Puerto Rico are affected. Owners of subject vehicles will be notified by mail in early October. They will be informed to bring their vehicle to the nearest Mazda dealer as soon as possible. Dealers will inspect the fuel tank to determine if the defect exists on the vehicle. If the defect exists, the dealer will replace the fuel tank and charcoal canister at no cost to the customer. A rental or loaner vehicle will be provided at no cost to the owner, until the vehicle is repaired for this concern. If there are no concerns, the vehicle will be returned to the customer. Should a customer not want to drive the vehicle to the dealership, they may contact Mazda's 24-hour Roadside Assistance service at 800-866-1998 and have the vehicle picked up and delivered to the dealership. There have been no reports of accidents or injury related to this issue.

2018 Mazda6 refresh takes the car further upmarket

The 2018 Mazda6 is, on the surface, a very mild refresh. The front grille has been given more depth, and the fascia is generally cleaned up a bit, putting the design inline with the new CX-5 and future Mazda products. The interior has been given the same treatment: cleaned up and modernized. But throughout the car, some important updates under the skin make the 6 a more compelling product, and one that continues the company's push upmarket. The biggest change has already been partly revealed, and that's the addition of Mazda's turbocharged 2.5-liter four-cylinder. It's the same engine found in the CX-9, and Mazda has now revealed it will make the same 250 horsepower and 310 pound-feet of torque with premium fuel. The engine will also happily accept 87-octane, in which case the engine will make 227 horsepower. Though the addition of this engine is welcome, we're a bit disappointed to learn that it will only be available with a six-speed automatic transmission. If we're lucky, we might see Mazda add a manual option, since when Mazda launched the current Mazda3, the larger 2.5-liter engine was initially only available with an automatic. But try not to get your hopes up too high, either. The good news is that Mazda will continue to offer a manual transmission as well as an automatic with the base, naturally aspirated 2.5-liter four-cylinder. This engine will now feature cylinder deactivation, as will the 2018 Mazda CX-5. This system will shut off the cylinders on each end at cruising speed to improve fuel economy. Official fuel economy ratings for both engines have yet to be released. Aside from the powertrain, Mazda says it has made a few other mechanical improvements. The suspension has been retuned, and the steering rack rigidly mounted to the chassis to improve handling. Thicker sheet metal for the rear wheel wells, thicker trailing arms, and a bevy of braces have also been added in order to reduce noise for a more refined driving experience. The interior has also been updated for more refinement, particularly on the new Signature trim model. The sleeker interior design on all Mazda6s is joined by redesigned seats Mazda says are more comfortable. Those seats are now available with optional ventilation. A windshield-projected heads-up display, adaptive cruise control that can bring the car to a stop and resume accelerating, as well as an instrument panel with a configurable 7-inch screen are other options.

The spirit of these 7 weird Mazdas lives on in today's cars

HIROSHIMA, Japan — When visiting the Mazda Museum in Hiroshima, housed amidst the company's main manufacturing site on the shore of the Enko River, you can follow Jujiro Matsuda's early 20th century entrepreneurial path from artificial cork manufacturer to machine and machine toolmaker, to motor vehicle producer. But probe a bit deeper into the exhibits, and you can uncover more than just a chronicle of corporate achievements: delightfully weird outliers, paragons of oddball design, engineering and marketing solutions It's looking at these delightful misfits that really illustrates Mazda's tale. You can also see precisely how many of these vintage conveyances led directly (or indirectly, or obtusely) to Mazda's most iconic American-market cars and trucks. Our seven favorite precursors, and their lovable successors, are listed below. 1931 Type TCS/Mazda B-Series Mazda's first vehicle was this little three-wheeler, powered by an air-cooled, one-cylinder motor. Because the company lacked a distribution network at the time, the trucklet was marketed by Mitsubishi; hence the three-diamond pattern on its side. All of this is very reminiscent of the company's eventual foray into the U.S. market, where its sales were spearheaded by compact pickups. The B-Series, which was one of the first Mazda vehicles available in the U.S., arrived in 1972, and stuck around through the first decade of the 21st century. Like its partnership with Mitsubishi, Mazda teamed up with stakeholder Ford to market this little truck as Ford's first small pickup, the Courier, the precursor to the Ranger. There was even a rotary-powered B-Series for a few years, but we're getting ahead of ourselves. 1968 Bongo Van/Mazda5 The Bongo allegedly was the first one-box van design in Japan, and apparently it was so popular that the name Bongo became, for a period of time, the generic metonym for the category—the way that Kleenex is a stand-in for all facial tissue. With a tiny rear-mounted engine and a planar expanse of metal to push around, it was not particularly fast, but it was both spacious and innovative. The same could be said of the brand's mini-minivan, the Mazda5, which was available for a couple of generations in the States in the Aughties. Sadly, the name 5 never caught on as a synonym for fun-to-drive family hauler, at least not yet, and the category itself (like nearly every other car category) was crushed in America by the rise of the crossover.