2011 Mazda 2 Coupe Hatchback Manual Transmission Red on 2040-cars

Auto blog

Mazda zooms into SEMA 2016 with lighter MX-5 Speedster and RF Kuro concepts

It's almost time for the 2016 SEMA aftermarket show again, if you haven't guessed already by the steady parade of early looks at various show cars. Mazda's MX-5 creations are generally a highlight for us, unapologetic Miata junkies that we are. This year's cars should be just as exciting as last year's, one being a revision of last year's Speedster concept and the other based on the brand new, sexy RF retractable targa top model. Both SEMA MX-5s were designed and built in-house at Mazda's Irvine design studio. This year's Speedster is somehow even lighter than before. Mazda carved 100 pounds out of it, making it a staggering 350 pounds less than a production soft top model. It's also been repainted in a color called "White Ether", which we're imagining looks something like the "Blue Ether" paintjob on last year's highly reflective Speedster minus the blue tint. Mazda will probably never sell a roofless Miata or anything this lightweight, but maybe it should. It looks like it'd be a blast to drive at a road course. And then there's the RF Kuro concept, the first RF-based SEMA show car, which is shown in the teaser above. It doesn't seem terribly extreme, to be honest. It's wearing a matte charcoal paint, which explains the "Kuro" moniker – kuro means "charcoal" in Japanese. A set of 17-inch RAYS forged wheels and MX-5 Cup suspension, and that's about it. Not to knock it; the RF is a sexy looking thing as it sits, and Cup suspension should make it handle even more like a go-kart. Of course, both concepts will be fully revealed at the show next month in Las Vegas. Stay tuned for a dose of concept Miata hotness.Related Video:

Evo blasts around in a Spa 24H-winning Mazda RX-7

Think of the Mazda RX-7 today, and your thoughts likely turn to the turbocharged third-generation version of the '90s that's an icon among the tuning and drifting communities. Many years before that swoopy coupe was hanging the tail out, the first model of RX-7 was also quite a track star, though. Evo's Richard Meaden has gotten ahold of a race-prepped version that counts a victory in the 1981 Spa 24 Hours to its name – the first Japanese car to claim that honor – for a fantastic video. With 225 horsepower and weighing around 1,984 pounds, this RX-7 doesn't look like a giant killer on paper. However as Meaden illustrates, the coupe puts those rotary-powered ponies to very good use. Driving it requires constantly keeping things on the boil because the muscle is essentially absent below 7,000 rpm. Once in the sweet spot, things start progressing quickly, though. As a wonderful cap to the wall of noise from the engine, little licks of flame also shoot out of the exhaust on downshifts. Thankfully, Evo's video team captures all of the mechanical noises quite well, and the clip is a treat for those with a good pair of headphones. Despite the race-winning pedigree, Meaden has no problem grabbing the little coupe by the scruff of the neck. He chucks it through the corners to get the tail loose, and the little wisps of smoke from the rear tires prove the original RX-7 knows how to drift too. These early cars definitely worth being remembered in the pantheon of Mazda performance.

Mazda Skyactiv-X Review | The revolution begins with a squeeze-bang

The matte black Skyactiv-X prototype looks like a rough Mazda3, perhaps reconstructed after a bad wreck by an over-enthusiastic owner of a spot welder and lots of gaffers' tape. Ribbed ducts poke out of the dash sending two breaths of conditioned air to no one in particular. Even its revolutionary engine, the thing we're here to experience, is entombed in a massive, nondescript cover to mask its unseemly noises. It's a wild, strange way to meet a very unconventional vehicle that promises diesel-like fuel economy, a wide torque band, and an exotic method for burning less gas than ever before. It takes a few hours for Mazda's engineers to explain the fundamental principles of operation. For more detail, read our Skyactiv-X Spark Controlled Compression Ignition explainer, but here's a very brief overview. Skyactiv-X marries some traditional gasoline engine characteristics with a novel form of compression ignition called SPCCI. The key for Skyactiv-X is to use very high compression in the cylinder and an extremely lean fuel-air mixture. Squeezed right to the cusp of getting hot enough to blow up all on its own (which is very hard to predict), a squirt of extra gas and a spark interject to cross that compression-ignition threshold in a controlled and predictable manner. See the animation below: That takes a few essential components to get just right. One is a massive amount of computer processing power and some pressure sensors in the individual cylinders, because the ambient conditions change how and when these things happen. Skyactiv-X uses a clutched supercharger to pump in additional air when needed to nail the mixture precisely, and high-pressure injectors to get the low ratios of fuel to disperse properly in the chamber. And since it operates like a conventional gasoline engine sometimes, it uses valve timing to lower the very high compression ratio so it doesn't reach combustion ignition in that mode. In practice, the Skyactiv-X runs in compression ignition mode most of the time. In practical terms, that means it drives like a torquey gasoline Skyactiv engine. The torque curve is broad and flat — diesel-like in that respect. That also means it can get away with using a six-speed transmission and a lower final drive for better response. There's enough grunt and economy together that Mazda can let the engine spin faster — at 60 mph, it's running at roughly 1,000 more RPM than a similar gas engine, with greater efficiency.