2006 Mazda Mazdaspeed6 on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

2023 Japan Mobility Show Mega Photo Gallery: All the highlights and reveals from Tokyo

The 2023 Japan Mobility Show managed to serve up a surprise heap of exciting and futuristic designs and production reveals. Our staff was on the ground in Tokyo for this year's show, where we captured not just all of the latest automotive trends, but some genuinely weird and fascinating stuff.  Browse: Some Delightful Oddities of the 2023 Japan Mobility Show But on to the cars. This year's show featured introductions from Daihatsu, Honda, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki and Toyota. Some are weird; some are wild; most are probably destined to change significantly before production or merely fade into the void with the rest of the industry's vaporware, but if even a few of these make it to showrooms, we'll consider it a win. Scroll on down for our live galleries of each of the show's major debuts (and cars we're only now seeing in person for the first time). Enjoy!   BMW X2 and iX2 BMW X2 View 6 Photos   Daihatsu me:MO Concept Daihatsu me:MO concept View 14 Photos   Daihatsu Vision Copen Concept Daihatsu Vision Copen View 7 Photos   Daihatsu Osanpo Concept Daihatsu Osanpo View 6 Photos   Daihatsu Uniform Concept Daihatsu Uniform concept View 6 Photos   Honda Prelude Concept Honda Prelude concept View 5 Photos   Honda Sustania-C and Pocket Concepts Honda Sustania-C and Pocket Concept View 8 Photos   Honda CI-MEV Concept Honda CI-MEV View 3 Photos   Infiniti Vision Qe Concept Infiniti Qe concept View 14 Photos   Lexus LF-ZC Lexus LF-ZC View 8 Photos   Lexus LF-ZL Lexus LF-ZL View 10 Photos   Mazda Iconic SP Mazda Iconic SP concept View 8 Photos   Mitsubishi D:X Concept Mitsubishi D:X Concept View 8 Photos   Nissan Hyper Force Concept Nissan Hyper Force concept View 11 Photos   Nissan Hyper Tourer Concept Nissan Hyper Tourer concept View 6 Photos   Nissan Hyper Punk Concept IMG_6533 copy View 8 Photos   Subaru Sport Mobility Concept Subaru Sport Mobility Concept View 7 Photos   Suzuki Swift Suzuki Swift View 5 Photos   Suzuki eWX Suzuki eWX Concept View 3 Photos   Suzuki eVX Suzuki eVX concept View 4 Photos   Toyota Land Cruiser Se Concept Toyota Land Cruiser Se concept View 4 Photos   Toyota FT-3e Concept Toyota FT-3e View 6 Photos   Toyota FT-Se Concept Toyota FT-Se View 7 Photos     Tokyo Motor Show Honda Infiniti Lexus Mazda Mitsubishi Nissan Subaru Suzuki Toyota

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.