Turbochargd Gt Convertible Sports Car Roadster Turbo Coilovers Aluminum Radiator on 2040-cars

Auto blog

Mazda's next-gen SkyActiv engines will drop spark plugs in favor of high compression

Homogeneous charge compression ignition, or HCCI, is the black art of internal combustion engines that aims to produce diesel-like fuel efficiency for the cost of gasoline. Although some of its competitors have developed and subsequently given up on the tech, Mazda confirmed that the next-generation of SkyActiv engines will employ HCCI technology, improving fuel economy by 30 percent and at the same time reducing exhaust emissions. According to Nikkei, a new SkyActiv family of engines is set to debut under the hood of the next-gen Mazda3 sometime in 2018 before making its way into other vehicles. In simple terms, an engine that uses HCCI burns the air/fuel mix using pressure instead of with spark plugs, just like a diesel. At 14:1, Mazda's gasoline engines already have some of the highest compression ratios out there, but a move to HCCI means cranking up the compression to 18:1. While the tech sounds relatively straightforward, using HCCI means dealing with a number of side issues. It's one of those "on paper" ideas that compounds problems when put into practice. Heat, revs, and fuel must all be carefully managed as gasoline doesn't burn the same way as diesel. Mazda is mum on details, but the automaker seems confident that the issues have been sorted. If the new engines do indeed make it to market with HCCI, Mazda will have out-engineered GM, Daimler, and Hyundai, all of which have tried and failed to develop HCCI engines in a cost-effective package. With the market moving towards electrification, it's interesting to see Mazda still focusing so heavily on traditional internal combustion gasoline engines. It's an indication of where they see the market heading for the next few years. Although the automaker has been hesitant to move forward with hybrid and electric powertrains, Nikkei also reports that Mazda will begin mass production of EVs in 2019. Related Video:

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Mazda plans a new crossover for 2021

If Mazda is going to increase sales, it's going to need more crossovers. According to company CEO Masamichi Kogai, a new crossover that won't cannibalize sales of the CX-3, CX-5, and CX-9 is coming in 2021, to be built at the new U.S. factory Mazda is building in partnership with Toyota. The plant will be able to build 150,000 vehicles per year, and that full capacity will be reserved for the new CUV. With 112,235 units sold, Mazda's best-selling vehicle in the United States last year was, not surprisingly, the CX-5. With that in mind, it seems a safe bet that the new crossover will be a replacement for the discontinued CX-7 to slot above the CX-5 and below the CX-9. Kogai told Automotive News that the vehicle will be designed for America and built exclusively in the States. "We are actually going to introduce a totally new and different type of SUV," said Kogai. We don't know exactly what that means, but we hope the new model line follows Mazda's tradition of crossovers that are more fun to drive than their main competitors. Related Video: