Mazda Miata Only 40380 Miles on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Our Mazda MX-5 Miata has the best engine bay in the business

One of the things that's really disappointing about modern cars is how they all hide their technology under a proverbial bushel. You pop the hood, and nine times out of 10, you're faced with some amount of black plastic hiding the functional bits. On some cars the plastic covers the bare minimum to have a "presentable" engine. Others have every tank, hose, wire and screw buried under a layer of smooth plastic. Few exemplify this practice better than engine bay of the current Lexus LS 460, seen below. If Lexus was this embarrassed about its engine, maybe it should have simply bolted the hood shut. However, like with weight gain and power creep, our fourth-generation Mazda MX-5 Miata bucks the plastic trend. Lift the aluminum hood of the little roadster, and you travel back in time more than a decade. (See the gallery up top.) Only one bit of decorative plastic is in sight, and it proclaims the car's Skyactiv technology and hides some of the wires leading to the ignition coils. Otherwise, nothing else is obscured. The shock tower braces, manifolds, battery terminals, the whole shebang is all right there for you to see. What's particularly amazing is that it all looks good. Even in some cars that eschew plastic covers, it's no guarantee of an attractive engine bay. We just had a new Honda Civic Sport hatchback (seen immediately above), and while it doesn't sport a plastic engine cover, you can see from the photo that it's not particularly attractive with tubes and cables snaking every which way. But in the Miata, the hoses and wires are kept to a minimum, and the ones that are there are arranged in a way that isn't haphazard or tangled. Then, in the middle, there's the clean, simple aluminum cam cover as the gleaming centerpiece, similar to those of the first- and second-generation cars. As the owner of a '99 Miata, this detail in particular gives me the warm fuzzies. The fully exposed engine bay fits with the Miata's personality. The car is very straightforward, it features just the absolute minimum of style and comfort additions, and is highly accessible. I would say the Miata's engine bay is the window to its soul, if driving it didn't offer a clearer picture. Related Video:

Fiat 124 caught entirely undisguised

Dear automakers, please continue making these kind of mistakes. Thanks to what we're guessing is some lax security, the all-new, Mazda MX-5 Miata-based Fiat 124 was spotted taking part in a photo shoot near Santa Barbara, CA. The images show what we'd consider a fairly simple rebadging job. The 124 gets new front and rear clips that not only harken back to the original 124 (not to mention other Fiat roadsters, like the Barchetta), but also serves to distance this droptop from the rest of the company's US range. The similarities between the 124 and the car it's based on are even more obvious in the cabin. This is an MX-5 interior with Fiat's big, red badge on the tiller. That means the same quality materials and knob-dial infotainment system that have been so well received in the Miata. It's under the hood, though, where the Fiat really differs from its Japanese cousin. According to our spy, the vehicle shown here features some kind of two-pedal setup – probably the six-speed Euro twin-clutch used in the 500L and Dodge Dart. Don't worry, though, a six-speed stick will also be on offer. Regardless of transmission, we can expect a 180-horsepower version of the 1.4-liter, turbocharged, four-cylinder offered in the 500 Abarth. And if that's not enough good news, a dedicated Abarth model will likely arrive after launch, which our spies claim will use the 1.75-liter turbo and DCT from the Alfa Romeo 4C. While this represents a good look at the new 124, we'll probably be waiting until the LA Auto Show in November for the official look. Stay tuned.