Low Miles! 6 Speed! Leather! Bose! Look! on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda's product roadmap after Skyactiv-X: diesel, rotary, hybrids, even EVs

When we first heard that Mazda had cleared the major hurdles on gasoline compression ignition, and were just tidying up the details with clear production intent, the first kneejerk thought was: That's it for Mazda's consumer diesel. In particular, the Skyactiv-D that was intended for sale in the U.S., only to be delayed for years by various regulatory roadblocks and other issues that Mazda is frustratingly (but understandably) vague on. At least, it'd die out at some point down the road once Skyactiv-X was widely available. It turns out that's not the case at all. Mazda will adopt an approach that becomes more and more electrified and diverse the closer you get to 2035. But internal combustion will play a deep and central role up to that point, and probably beyond. Before we get to what those different powertrains, diesel and electrified, will look like down the road, let's stop and think about Mazda's philosophy. It couldn't be more different from the approach of most manufacturers that are currently producing BEVs and hybrids, which are heavily incentivized by both the automakers and the government, both state and local, depending on the locality. Even with all that cash on top of the hood, the market penetration of electrified vehicles is low. Mazda's too small to lose money paying people to drive EVs and hybrids. Its risky solution (which is plucky, but has had mixed results) is to simply improve the internal combustion engine. It's achieved the best fleet average fuel economy in the U.S. already, using a range of direct-injection gas engines that are mostly naturally aspirated. A few tiny nods to electrification have been introduced, like i-eLoop regenerative braking and the Demio EV (a Japanese-market, last-generation Mazda2 with a 20kWh battery that was tested with a tiny rotary engine range extender). But the focus is on combustion, not electricity. And that focus isn't going away anytime soon. Mazda believes that pure gasoline, gasoline hybrid, and gasoline PHEV vehicles will remain the vast majority of vehicle sold through 2035. At that point, Mazda forecasts, BEV and fuel cell vehicles should make up about 15 percent of the total of Mazda's lineup. The remaining 85 percent will utilize some form of internal combustion engine. Now, that includes hybrids and even a small number of CNG/LPG cars. And these are global numbers, as well. There may be even fewer fuel cell and CNG/LPG vehicles sold here than abroad.

2016 Mazda MX-5 Miata Club Edition sharpens, styles the new roadster

One could argue that any iteration of the last-generation Mazda MX-5 Miata was worth having. But were it our money on the line, we'd have likely driven home with the Club, a simple trim that, for a reasonable $28,665 (for the retractable hardtop model), added a number of performance and aesthetic features. The 2016 MX-5 Miata Club Edition should prove to be a successful followup. Like last year's model, it adds a limited-slip differential, a retuned suspension with Bilstein shocks and a tower brace under the hood. On the aesthetic side of the game, 17-inch gunmetal wheels are included, along with a new rear spoiler and a front splitter. For those that demand an even sharper Club Edition, though, Mazda will also offer even lighter wheels, courtesy of BBS, along with Brembo brakes and the aero kit from the MX-5 Global Cup racer. Check out our full original post on the MX-5 Miata Club Edition, as well as a complete gallery of live images from the 2015 New York International Auto Show. Related Video: 2016 MAZDA MX-5 MIATA CLUB MAKES WORLD DEBUT AT NEW YORK INTERNATIONAL AUTO SHOW - Performance-focused MX-5 Club has trim level-exclusive Bilstein suspension, limited-slip differential - NEW YORK (April 1, 2015) – Mazda North American Operations (MNAO) today introduced the 2016 Mazda MX-5 Miata Club at the New York International Auto Show, marking the world debut of the North American-focused Club model. Lighter, smaller, quicker and more nimble than its predecessor, MX-5 has adopted Mazda's full suite of SKYACTIV Technology and KODO-Soul of Motion design. In the process, MX-5 has shed approximately 150 pounds from its predecessor, with a curb weight of 2,332 lbs. when equipped with SKYACTIV-MT six-speed manual transmission (2,381 lbs. with the six-speed automatic transmission). The MX-5 Club heightens performance with trim-level exclusive: - 17-inch gunmetal alloy wheels wrapped in 205/45R17 tires - Limited-slip differential when equipped with SKYACTIV-MT - Bilstein shocks when equipped with SKYACTIV-MT - Shock tower brace when equipped with SKYACTIV-MT - Front air dam and rear lip spoilers Standard equipment on MX-5 Club models includes MAZDA CONNECTTM infotainment system with a seven-inch color touchscreen display and multi-function commander control, HD and SiriusXM Satellite Radio, two USB ports, piano black side mirrors and seatback bars and a nine-speaker Bose audio system with headrest speakers.