Automatic-multi Compact Dis-side Air Bags-alloy Wheels on 2040-cars

Auto blog

2019 Mazda CX-5 Signature AWD diesel unveiled in New York

NEW YORK —It seems like we've been waiting forever, but the wait is finally over. Mazda has finally launched a diesel version of the CX-5 for the U.S. market, unveiled at the 2019 New York International Auto Show. Specifically, the 2.2-liter Skyactiv-D turbo-diesel engine will be offered in the higher-end CX-5 Signature AWD, part of what Mazda calls its "path to premium," as the company continues to set its sights on some of the more expensive competition. The Skyactiv-D 2.2 makes use of a sequential twin turbocharger that employs a smaller turbocharger first at low rpm for quick throttle response, after which a valve opens to spool up a larger turbocharger at higher rpm. Mazda says this provides "smooth and linear response from low to high engine speeds, and greatly increases low- and high-end torque." Mazda estimates the output of the engine to be 168 horsepower at 4,000 rpm and 290 pound-feet of torque from a low 2,000 rpm. The engine has a rev limit of 5,500 rpm. As of right now, it's only in the all-wheel-drive version and only in the Signature trim level. As such, it gets a ho-hum EPA fuel economy rating of 27 mpg city, 30 highway and 28 combined. We previously saw fuel economy figures for a potential front-drive diesel CX-5 getting just slightly better fuel economy, at 28 city, 31 highway and 29 combined, but no word yet on if and when that'll be made available. The mediocre diesel fuel economy, while expected given the midstream shift from one emissions strategy to another, is particularly disappointing in context. The non-turbo CX-5 AWD, which makes 187 hp and 186 lb-ft, gets 24 city and 30 highway for 26 combined mpg – just 3 mpg less in the city and 2 mpg less overall than the diesel. The much more powerful CX-5 Turbo, which makes 250 hp and 310 lb-ft, gets 22 city, 27 highway, and 24 combined. Mazda is taking pre-orders for the 2019 CX-5 Signature AWD with Skyactiv-D 2.2 starting now, at an MSRP of $42,045, including $1,045 in destination fees. We have to point out that this is a sizable jump in MSRP from a CX-5 Signature AWD with the more powerful turbo engine, which lists for $38,235 – a $3,810 difference in fact. Given the lackluster fuel economy and considerable decrease in power and torque, we're concerned that the diesel may be a tough sell at this sort of premium.

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.