2010 Mazda Mx-5 Miata Auto Hardtop Convertible Leather on 2040-cars

Auto blog

Modded budget Mazda Miata takes on new Porsche Boxster in more challenges

Earlier this month, our friends across the pond at Auto Express released the first in a two-video series that would see them try and build up a second-generation Mazda MX-5 Miata that could best a standard Porsche Boxster around the track. While that first video detailed the mods to the MX-5 - a supercharger, some suspension upgrades and a new set of super-sticky rubber being chief among them - and set baseline lap times for the stock car, today, we have the results of the 5,000-pound ($8,200) upgrade job.
Of course, we aren't going to spoil those for you. You'll need to watch the full video, which recaps the upgrades before digging into a comparison of both straight-line-speed differences between the 2.7-liter Porsche Boxster and blown Miata, as well as their behavior and lap times on the track.
Take a look and let us know what you think in Comments.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

2016 Mazda MX-5 Miata will rock 2.0L SkyActiv engine in US, 1.5L elsewhere

Let the speculation finally end - we know what will power the next-generation 2016 Mazda MX-5 Miata, and it's not turbocharged. The US model will get a SkyActiv 2.0-liter engine and six-speed manual, while models in the rest of the world have a 1.5-liter engine, confirming earlier rumors.
Unfortunately, Mazda isn't letting loose how much power either of these mills make just yet. For sake of comparison, the current SkyActiv 2.0 in the Mazda3 produces 155 horsepower and 150 pound-feet of torque, and the 1.5-liter in the UK (and elsewhere) has about 99 hp and 110 lb-ft of twist. However, the current Miata produces 167 hp and 140 lb-ft.
But fret not droptop fans. The company's brochure from the 2014 Paris Motor Show confirms, "all available drivetrains have been specially tuned for the all-new MX-5," which at least hints at the possibility of more performance. Also, even if the numbers remain untouched, the new Miata should feel even more sporting on the open road. That's because Mazda says the new model weighs in the neighborhood of 2,200 pounds; with that in mind, the 2016 car would boast around 14.19 pounds per horsepower versus 14.85 lb/hp in the present MX-5. Progress!