2007 Mazda Mx-5 Miata Touring Convertible 2-door 2.0l 15,500 Miles! on 2040-cars

Auto blog

Bauer Catfish is a Miata-based trackstar in the making [w/videos]

We're not trying to make a joke here. The creation you see above really is called the Bauer Catfish, and while the name is about as attractive as your average bottom feeder, the car itself is built on a sexy notion. Take the mechanical bits of one 1990-2005 Mazda MX-5 Miata, add in a tube chassis for as little weight as possible, complete with some custom body work and go forth. Bauer says the finished product weighs in at just 1,550 pounds, and the company will be happy to pull the stock four-cylinder to drop in a healthy General Motors LS V8.
The pre-production prototype shown above competed in last year's 25 Hours of Thunderhill, finished the race and earned a spot on the podium in the "anything goes for sports racers" ESR class. Very cool.
If you're looking for a dedicated track car, it may not get any better than this for the money. Expect to pay around $13,900 depending on options, plus the cost of your donor Miata. That's a good sight cheaper than a used Chevy Corvette Z06 and likely to be quite a bit more fun. After you're done watching it in action in the brief videos below, check it out over at Bauer Ltd.

2016 Mazda MX-5 Miata first in-car observations

We've had few days to digest the all-new 2016 Mazda MX-5 Miata since the roadster was first revealed on Wednesday evening when we offered you our first impressions. Since that time, we've gone back and looked at the car a number of times in person here in California, and we've even seen it briefly run under its own power (okay, it was more of a saunter). What we didn't get the chance to do at the reveal, however, was sit inside the car. We've since been able to remedy that, and while we haven't been allowed to drive the new roadster, we do have some initial in-car impressions to share with you.
First, the location and feel of the major controls is quite excellent. The three-spoke steering wheel is an MX-5 specific item - it's not shared with any other Mazda. That's vital, because others would likely be too big in diameter or have the wrong rim thickness. The wheel's redundant controls seem to be well laid out and the airbag boss is very small. The column tilts, but unfortunately and somewhat inexplicably, it still doesn't telescope.
Pedals are well-spaced, and the six-speed manual has the same short throws and positive engagement that we've come to know and love.

Mazda recalling 18k Mazda6 and RX-8 models over airbag inflators

Faulty Takata airbag inflators keep taking their toll on automakers. Mazda is the latest to be affected in the US by announcing a recall covering 18,050 Mazda6 and RX-8 models to replace the front, passenger-side airbags. Specifically, the campaign covers 18,000 Mazda6 units from the 2003 and 2004 model years built between May 29, 2002, and March 4, 2004, and 50 RX-8 vehicles from the 2004 model year made between June 25, 2003, and June 30, 2003.
As with the rest of the vehicles with these faulty inflators, it's possible for the part to rupture when deploying the airbag and potentially spray shrapnel at the occupant. Mazda's defect notice goes into a bit more detail than most about the problem saying: "some propellant wafers have been produced with an inadequate compaction force, or may have been exposed to uncontrolled moisture conditions (those wafers could have absorbed moisture beyond the allowable limits)."
This isn't Mazda's first difficulty with Takata-supplied airbags this year. The company was among the seven automakers that recalled vehicles in hot-weather states over the inflators. It also had to recently fix 42,000 Mazda6 vehicles in China over the issue.