2006 Sport (2dr Conv Sport Manual) Used 2l I4 16v Manual Rwd Convertible Premium on 2040-cars

Auto blog

Feds investigating 2010-11 Mazda CX-9 CUVs over braking issues

The National Highway Traffic Safety Administration is investigating 62,000, 2010-2011 Mazda CX-9 models over brake problems. The government safety watchdog says it has received seven complaints of an observed loss of power braking power to stop the crossover, according to the The Detroit News.
The NHTSA complaints say that the problem causes a hard pedal, increased braking effort and reduced braking effectiveness. Some complaints allege that they hear a hissing noise during braking similar to the sound of air leaving the tires. No injuries or crashes have been reported.
"As always, we are fully cooperating with NHTSA on their investigation. We cannot comment further at this time," said Mazda spokesperson Tamara Mlynarczyk to The Detroit News.

Mazda recalling 18k Mazda6 and RX-8 models over airbag inflators

Faulty Takata airbag inflators keep taking their toll on automakers. Mazda is the latest to be affected in the US by announcing a recall covering 18,050 Mazda6 and RX-8 models to replace the front, passenger-side airbags. Specifically, the campaign covers 18,000 Mazda6 units from the 2003 and 2004 model years built between May 29, 2002, and March 4, 2004, and 50 RX-8 vehicles from the 2004 model year made between June 25, 2003, and June 30, 2003.
As with the rest of the vehicles with these faulty inflators, it's possible for the part to rupture when deploying the airbag and potentially spray shrapnel at the occupant. Mazda's defect notice goes into a bit more detail than most about the problem saying: "some propellant wafers have been produced with an inadequate compaction force, or may have been exposed to uncontrolled moisture conditions (those wafers could have absorbed moisture beyond the allowable limits)."
This isn't Mazda's first difficulty with Takata-supplied airbags this year. The company was among the seven automakers that recalled vehicles in hot-weather states over the inflators. It also had to recently fix 42,000 Mazda6 vehicles in China over the issue.

Mazda2 production fires up in Mexico

Mazda has officially kicked off production of the next-generation Mazda2 at the company's new factory in Salamanca, Mexico. Alongside the auto assembly plant, operations have also commenced at the facility's engine machining factory.
"With the start of production of the all-new Mazda2, operations underway at the engine machining plant, and an increase in our annual production capacity, we now have an even stronger production framework capable of supplying global markets with Skyactiv products of the same high quality level as those made in Japan," Mazda de Mexico Vehicle Operation's President Keishi Egawa said in a statement. "At the same time, we are pleased to be able to make a contribution to Mexico's further economic growth."
MMVO joins Mazda's Hofu Plant in Japan and the Auto Alliance factory in Thailand, which commenced Mazda2 production in July and September, respectively.