Auto blog

2018 Mazda CX-5 spied testing in Southern California

It appears the replacement for the Mazda CX-5 is on its way. The current model, though a few years old at this point, is still one of our favorite crossovers on the market. Its combination of handsome styling, practicality, and a genuine fun-to-drive nature make it a winner in our hearts. Hopefully this new model doesn't stray too far from that winning recipe. At least on the outside, that seems to be the case. The spy photos reveal Mazda's Kodo design language in full bloom. The general shape is the same as the current model, but the curves are a little tighter and appear similar to the new CX-9 and Chinese-only CX-4. The grille loses the horizontal bars for a deep-set mesh pattern, while the whole fascia appears to be more upright. The headlights and taillights look to be slimmer and slightly re-sculpted versions of the current shape. Other details for the upcoming CX-5 are scarce. The crossover is expected to debut next year as a 2018 model. It's unknown what engines or transmissions will be available, though the current powertrains are likely to carry over. There's also the rumor of a Mazda diesel making its way over, but, as always, it seems like a long shot. Related Video:

Mazda Skyactiv-X Review | The revolution begins with a squeeze-bang

The matte black Skyactiv-X prototype looks like a rough Mazda3, perhaps reconstructed after a bad wreck by an over-enthusiastic owner of a spot welder and lots of gaffers' tape. Ribbed ducts poke out of the dash sending two breaths of conditioned air to no one in particular. Even its revolutionary engine, the thing we're here to experience, is entombed in a massive, nondescript cover to mask its unseemly noises. It's a wild, strange way to meet a very unconventional vehicle that promises diesel-like fuel economy, a wide torque band, and an exotic method for burning less gas than ever before. It takes a few hours for Mazda's engineers to explain the fundamental principles of operation. For more detail, read our Skyactiv-X Spark Controlled Compression Ignition explainer, but here's a very brief overview. Skyactiv-X marries some traditional gasoline engine characteristics with a novel form of compression ignition called SPCCI. The key for Skyactiv-X is to use very high compression in the cylinder and an extremely lean fuel-air mixture. Squeezed right to the cusp of getting hot enough to blow up all on its own (which is very hard to predict), a squirt of extra gas and a spark interject to cross that compression-ignition threshold in a controlled and predictable manner. See the animation below: That takes a few essential components to get just right. One is a massive amount of computer processing power and some pressure sensors in the individual cylinders, because the ambient conditions change how and when these things happen. Skyactiv-X uses a clutched supercharger to pump in additional air when needed to nail the mixture precisely, and high-pressure injectors to get the low ratios of fuel to disperse properly in the chamber. And since it operates like a conventional gasoline engine sometimes, it uses valve timing to lower the very high compression ratio so it doesn't reach combustion ignition in that mode. In practice, the Skyactiv-X runs in compression ignition mode most of the time. In practical terms, that means it drives like a torquey gasoline Skyactiv engine. The torque curve is broad and flat — diesel-like in that respect. That also means it can get away with using a six-speed transmission and a lower final drive for better response. There's enough grunt and economy together that Mazda can let the engine spin faster — at 60 mph, it's running at roughly 1,000 more RPM than a similar gas engine, with greater efficiency.

Mazda CX-5 diesel gets EPA fuel economy ratings

Mazda has been promising that it will bring the Skyactiv-D diesel engine to the United States pretty much since the last Mazda6 redesign for the 2014 model year. And even in the wake of delay after delay, the company has insisted it will happen. Well, it looks like we may not be far from the fulfillment of this promise, since the EPA and DOT's FuelEconomy.gov website now has numbers for the diesel-powered Mazda CX-5. What's surprising, besides the existence of hard numbers, is that those numbers aren't actually that big of an improvement over the gas engine. In fact, highway numbers are the same as the gasoline versions. The front-drive CX-5 diesel gets 31 mpg on the highway, and the all-wheel-drive one gets 30 on the highway. The diesel does see improvements in the city. The front-drive model gets 28 mpg versus 25 for the gas equivalent. The all-wheel-drive model gets 27 mpg rather than 24 for the gasoline version. Also concerning is the fact that the CX-5 diesel isn't the only diesel in the segment. The Chevy Equinox is available with a diesel, too, and while city mpg is about the same, it can hit 38 mpg with all-wheel-drive and 39 with front-drive on the highway. With this in mind, Mazda will probably market the engine as more of a performance upgrade, and maybe something with a bit of extra towing capacity. This is because the engine is expected to make a bit over 170 horsepower and 310 pound-feet of torque. The power number is a smidge below that of the 187 from the 2.5-liter naturally aspirated gas engine, but the torque number is much higher than the gas engine's 186 pound-feet. We've also reached out to Mazda for comment on this development. A representative offered no further comment beyond the company staying committed to diesels. Related Video: