2001 Mazda Miata Ls Convertible 5 Speed Leather 64k on 2040-cars

Auto blog

2019 Mazda3 gets only two engines in U.S.; here are details on suspension, AWD

We learned a lot about the 2019 Mazda3 hatchback and sedan when it made its debut at the L.A. Auto Show. It will still have a manual transmission, it will offer all-wheel drive for the first time, and it's a stunner inside and out. But we still had questions about some of the details, so we spoke with folks from Mazda, including a couple of engineers for details on engines, suspension and drivetrains. First off, of the five engines announced for the Mazda3, just two of them are slated for the United States. At launch, the Mazda3 will be offered only with a naturally aspirated 2.5-liter four-cylinder. It's mechanically pretty much the same as what you'll find in the Mazda CX-5 and Mazda6. It even features cylinder deactivation. The only real difference between this engine, its predecessor, and the one in other Mazdas is some minor engine tuning tweaks. Power is almost the same with 186 horsepower and 186 pound-feet of torque, gains of 2 horsepower and 1 pound-foot. Fuel economy is rated at 27 mpg in the city, 36 on the highway, and 30 overall for front-wheel-drive models. We would expect the all-wheel-drive model to have slightly worse fuel economy simply due to extra weight and having to power two extra wheels. The Skyactiv-X engine will become available later in 2019. It will be rolled out in Europe first, with America coming after. When it does come here, it will be offered in states with stricter emissions regulations before coming to other states. While we're on the topic of engines, we also probed a bit about the possibility of the turbocharged 2.5-liter engine coming to the Mazda3. We did get the typical response of not being able to comment on future product. However, they did confirm that the turbocharged engine does in fact fit in the new Mazda3, since it and the naturally aspirated engine are very similar, and the naturally aspirated engine still uses an enormous header, meaning turbo plumbing wouldn't be an issue. Everyone we spoke with at Mazda did emphasize that they are listening closely to buyers, which is what led to the turbo engine being offered on the Mazda6 and CX-5, as well as the introduction of all-wheel-drive to the Mazda3. So, if you, like us, want to see the turbo engine added to the Mazda3, let the company know. They might just do it. Now as for drivetrains, the company is still deciding which trims and which combinations of engines will be offered.

2014 Mazda6 i-Eloop to net 40 mpg hwy, 28 mpg city

Even before Mazda unveiled the 2014 Mazda6, it had introduced its innovative, non-hybrid i-Eloop (Intelligent Energy Loop) brake regeneration system. This technology converts kinetic energy into usable electricity using the alternator, a DC/DC converter and a capacitor mounted just behind the front fascia. During deceleration, the alternator captures energy that is then stored in the capacitor, which can later be used to directly power electric devices like climate control and audio systems. When i-Eloop power is used, it reduces the load on the engine and helps to conserve fuel.
Now available on the Mazda6, i-Eloop is only available on the $29,695 Grand Touring trim level as a part of the $2,080 GT Technology Package, meaning that buyers desiring i-Eloop will have to spend at least $31,775 (not including destination). The added price of this technology should be worth it for those looking for optimal fuel economy as the i-Eloop, combined with the package's active grille shutters, will bump the sedan's fuel economy numbers up to 28 miles per gallon city and 40 mpg highway - both are improvements of 2 mpg over the standard Mazda6 Grand Touring. The GT Technology Package also includes a Sport mode, lane departure warning, high beam control, radar cruise control and forward obstruction warning - the latter two technologies are currently offered in a $900 package that is being discontinued.
i-Eloop will eventually be offered on other Mazda products including the 2014 Mazda3. Scroll down for the official press release on the Mazda6's fuel-saving i-Eloop technology.

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video: