2000 Mazda Mx-5 Miata Ls 5-speed 104k Super Clean Must See And Drive L@@k !!! on 2040-cars

Auto blog

Fiat version of Mazda MX-5 Miata to be called 124 Spider

Fiat has a definite use for its recent US trademark on the 124 Spider name, and it's something that should make many performance fans quite happy. FCA CEO Sergio Marchionne confirmed to Auto Express that the Italian brand's future roadster would bear the classic name. Auto Express reportedly asked Marchionne directly about the convertible at the 2015 Geneva Motor Show. The CEO said: "Do we want to do it now?" After another executive verified the name, Marchionne responded: "There you go – a world class premiere right in this room!" Autoblog reached out to Fiat Brand communications boss in the US Ariel Gavilan for more information, and he verified the story. Gavilan said that brand head Olivier Francois confirmed the 124 Spider name to international media during a briefing in Geneva. FCA isn't going quite so far as officially confirming that the 124 Spider shares a platform with the latest Mazda MX-5 Miata, but that's almost a certainty. The two automakers jointly developed the chassis, and the original plan was for it to underpin an Alfa Romeo. However, Marchionne didn't want an Alfa assembled outside of Italy. Fiat even hinted at this possible change as far back as the corporation's five-year plan last summer. Insiders tell Auto Express that the 124 Spider reportedly carries retro-inspired style, and hopefully, that means the roadster evokes the look of the original 124 Sport Spider (pictured above) by Pininfarina. Fiat allegedly is also aiming for a weight less than 2,205 pounds, and the engine range is likely comprised of versions of the brand's 1.4-liter turbo. The mill already pumps out 160 horsepower and 183 pound-feet of torque in the Fiat 500 Abarth in the US. According to Auto Express, Fiat and Mazda have an agreement to launch the Miata in 2015 and the 124 Spider in 2016. A hotter Abarth version could come along eventually, too. Related Video:

100k Mazda6 sedans recalled over tire-monitoring systems

A tire pressure monitoring system (TPMS) is, as you might have guessed, designed to monitor the air pressure in the tires, and alert the driver if pressure drops. But a problem found in the Mazda6 could keep the system from doing its job. According to the recall notice issued by the National Highway Traffic Safety Administration, the TPMS in the Mazda6 might not recognize a loss in tire pressure if all the tires slowly deflate at the same time. Under-inflated tires, it goes without saying, could increase the risk of a crash. As a result, Mazda is recalling 99,711 examples of the 2014-2015 Mazda6 to have the system's software updated. RECALL Subject : Tire Pressure Monitoring System/FMVSS 138 Report Receipt Date: OCT 27, 2014 NHTSA Campaign Number: 14V675000 Component(s): TIRES Potential Number of Units Affected: 99,711 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2014-2015 Mazda6 vehicles manufactured October 25, 2012, to October 10, 2014. If the pressures of four of the tires on an affected vehicle gradually drop at the same time, the tire pressure monitoring system (TPMS) may not warn the driver of the drop in pressure. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 138, "Tire Pressure Monitoring System." CONSEQUENCE: A vehicle that is driven with under inflated tires may experience a sudden tire failure, increasing the risk of a crash. REMEDY: Mazda will notify owners, and dealers will update the TPMS software, free of charge. The recall is expected to begin on December 10, 2014. Owners may contact Mazda customer service at 1-800-222-5500. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch

Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models.  According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.