1991 Mx5 Mazda Miata on 2040-cars

Auto blog

Japan plans real-world diesel emissions test after companies fail

Japan's transport ministry plans to start real-world diesel emissions tests after an experiment found four models from Toyota, Nissan, and Mitsubishi that produced more nitrogen oxide (NOx) emissions than the nation's rules allow, according to The Japan Times. Regulators there usually only perform emissions checks in the lab. The VW diesel scandal has everyone double-checking their figures. Diesel versions of the Toyota Hiace van, Land Cruiser Prado, and Nissan X-Trail produced up to 10 times more NOx than allowed. The Mitsubishi Delica D:5 was up to five times over the limit, The Wall Street Journal reports. There was no evidence of defeat devices in the vehicles. Mazda performed well in the experiment, though. The CX-5 passed with nearly the same results on the road and in the lab. The Demio, better known as the Mazda2, did nearly as well with only slighter higher figures in the real world than in the controlled setting. The experimenters theorized the reason for the excessive emissions was that cold weather caused the engines' software to shut off the exhaust gas recirculation to prevent damage, according to the WSJ. However, this behavior also increased NOx production. Toyota, Nissan, and Mitsubishi don't have to worry about punishment from the transport ministry because this check was just an experiment. Their models already passed the mandated lab tests, which was the only requirement, according to The Japan Times. As governments begin greater real-world emissions tests, the results suggests diesels aren't very clean. A recent check in France found models from Ford, Renault, and Mercedes-Benz that didn't perform up to the standards. Regulators in India conducted similar evaluations and ordered VW to recall over 300,000 vehicles. Related Video:

2019 Mazda Miata officially announced with 181 horsepower

It turns out the rumors and leaks are true. The 2019 Mazda MX-5 Miata will indeed get a slight performance increase. This fall, the car's naturally aspirated 2.0-liter inline-four will make 181 horsepower and 151 pound-feet of torque. That's a 26 horsepower and 3 pound-feet bump over the 2018 model. It may not sound like a lot on paper, but consider the fact that it's a nearly 17 percent increase in power in a car that weighs just 2,332 lbs. When the current ND generation debuted a few years back, the Miata actually took a slight hit to power. It was offset by a sizable weight loss program, but it didn't stop people from making a fuss. These days, it's not often that a newer model actually loses power compared to the outgoing car. The new car now makes roughly the same power as the old turbocharged Mazdaspeed MX-5 from 2004. Peak power for the 2019 model comes at 7,000 rpm while peak torque arrives at 4,000 rpm. That's 1,000 more and 600 fewer revs respectively. The Miata's redline is now 7,500 rpm, up from 6,800. It should make the car feel more lively through the rev range and should drop the car's 0-60 mph time back under 7 seconds. The 2019 model only weighs 7-pounds more than the outgoing model, so it's essentially a non-issue. In order to get the extra juice, Mazda engineers did some significant work to the engine's internals. Piston mass has been reduced 27 grams while the connecting rods are down 41 grams. The exhaust system and inner exhaust manifold have been modified to reduce pumping losses by 30 percent. The intake and fuel injectors have been changed, too. A new dual-mass flywheel replaces the single-mass unit. This should help better manage engine vibrations and responsiveness. Lastly, the final drive ratio has been increased from 3.454 to 3.583. Other gear ratios remain unchanged. There are other minor but welcome changes for 2019. The steering wheel now telescopes, a boon for drivers with long legs. The doors are easier to open and feature revised door stops. The cupholders and seat levers have both been updated. Finally, there are new 17-inch wheels and a new brown canvas soft top. How all these changes will affect the car remain to be seen. While many people have been clamoring for more power, some of us here at Autoblog feel the Miata may lose some of its current character with such a significant shift in power and torque. Either way, we're as excited as ever to get behind the wheel. Related Video:

Perk up your Mazda Miata with BBR's new 248-horsepower turbo kit

For three decades, enthusiasts have argued whether the Mazda MX-5 Miata needs more power. For its part, Mazda seems fine with leaving the Miata as is, even reducing the horsepower from the third- to fourth-generation models, though the car lost a little weight. That's where tuners like BBR in the UK and Flyin' Miata here in the US step in, offering aftermarket solutions for those that crave a little more grunt. BBR announced today that its new 248-horsepower Stage 1 turbo kit is ready and waiting for the new 2.0-liter-powered ND Miatas, including the new Miata RF. BBR's first Miata turbo kit was released all the way back in 1990. Since then, the shop has been tuning and honing its craft, releasing ever-more potent variations its comprehensive power kit. This new version, like the previous ones, focuses not only on adding more power but maintaining the level of drivability and refinement you expect from all Miatas. The Mazda electronic safety features are retained, and the team is working on CARB emissions approval. That said, with BBR tune an ND Miata will hit 60 mph in just 5.0 seconds, roughly two seconds quicker than stock. To get the peak 248 horsepower and 236 lb-ft of torque, BBR does more than simply slap on a big turbo. In 2014, BBR began using a Mazda3 as a development vehicle in preparation for the new Miata's launch. A twin-scroll turbocharger is mounted onto a custom cast-iron manifold. A front-mounted aluminum intercooler keep things cool and doesn't require cutting up the bodywork. The engine breathes in through a K&N air filter and exhales through a stainless steel downpipe. The whole thing is controlled by BBR's Starchip / EcuTek RaceRom ECU software package. Other upgrades include silicone turbo pipes, an aluminum battery tray, a recirculating piston type dump valve, a carbon-fiber heat shield, and stainless steel oil and water lines. BBR is offering extended warranties from 12 to 36 months. In the US, the sole distributor is Flyin' Miata in Colorado. At $5,695, it's not a cheap proposition, but it is less expensive than one of Flyin' Miata's V8 swap kits. Less expensive (and less potent) performance kits are also available. Related Video: News Source: BBR Aftermarket Mazda Convertible Performance turbo tuner tuning