1991 Mazda Mx-5 Miata Convertible 5sp Manual Serviced Super Low Miles Carfax on 2040-cars

Auto blog

Mazda Recalling Cars Due To Spider Webs In Engines

It seems that Yellow Sac spiders really, really love Mazda. Three years after Mazda recalled 52,000 Mazda6 sedans over spider webs obstructing the evaporative canister vent lines of 2009 and 2010 Mazda6 models, another recall has been issued for 42,000 more of the models built between 2010 and 2012 and equipped with the 2.5-liter four-cylinder engine. According to the automaker, there have been nine confirmed sightings of spiders in vent lines since the original recall. It seems that covers were applied at the factory to keep the arachnids from entering, but it hasn't quite exterminated the problem. A reflash of the ECU is required that "[changes] the logic behind how the car purges the charcoal canister during normal operation," says Jeremy Barnes, Director, Public Relations & Brand Experience at Mazda North American Operations. So far, Mazda has not recorded any fires, accidents or injuries due to this tangled mess of webs. Recall notices will be mailed out to owners later this month. This story original appeared on Autoblog. Related Gallery Utter Driving Delight: The 2014 Mazda MX-5 Miata Recalls Mazda Mazda6

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video:

Weekly Recap: Mazda's rotary revival ignites Tokyo Motor Show

Forty-eight years ago Mazda pioneered rotary engines in the Cosmo Sport. Mazda then honed the technology, won with it on the racetrack, and made it one of its signature features. If you're an enthusiast, rotary was a reason you like Mazda. It's a great part of the company's past. But until this week, that's exactly what we thought it was. History. That all changed with the reveal of the RX-Vision concept at the Tokyo Motor Show, which reignited the passions of the Mazda faithful. Suddenly, rotary was no longer a relic. The rotary concept shown in Japan was a front-engine, rear-wheel-drive sports car wrapped in the company's latest Kodo design language. It's powered by a Skyactiv-R unit (R for rotary), though specs were not disclosed. Mass production is "currently on hold," Mazda said, maintaining it never stopped development of rotary technology, even after the demise of the RX-8. Beyond that, we know nothing, other than the optimistic statement Mazda offered that: the "RX-Vision represents a vision of the future that Mazda hopes to one day make into reality." Put simply: we agree. OTHER NEWS & NOTES: Subaru previews next-gen Impreza While the Mazda concept was the headliner from Tokyo, Subaru's Impreza design study also stood out. The five-door concept is a signpost for the look of next-generation Impreza. It blends sportiness with functionality, and it's wrapped in a striking shade of 'high-luminance silver.' The fenders are flared to signal Subaru's all-wheel-drive capability, and the front has futuristic headlights that look like something from an Audi E-Tron concept. While most of this will be toned down in production, the concept suggests an elevated style for the Impreza, which is due as a 2017 model. Porsche adds potent GTS model to 2017 Macan line Porsche is giving the Macan crossover the GTS treatment, which will start at $68,195 when it goes on sale in March. GTS translates to more power, a sportier suspension, and interior and exterior design cues that sharpen the looks and reflexes of one of the most athletic SUVs on the market. Porsche recalibrated the 3.0-liter twin-turbo V6 from the Macan S to make 360 hp and 369 lb-ft, (up from 340 hp and 339 lb-ft in the S). It teams with a seven-speed PDK gearbox and all-wheel drive. An air suspension is standard. The body features a slew of black accents, and the standard 20-inch RS Spyder wheels are done up in a shade of satin black. The cabin gets leather, Alcantara, and GTS logos.