--- Grand Touring / Power Hard Top / Automatic / $32,235 Msrp on 2040-cars

Auto blog

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

This California rally is vintage Japanese car heaven

What's so good about the future? This is what I was thinking when some folks at Mazda invited me and a handful of other journalists to join them on the second-annual Touge California. It's a rally for classic Japanese cars that covers a huge chunk of Southern California's twistier roads, where fans get to test their beloved machines. Oh, and it attracts swarms of admirers with cameras. "It is not a race. It is a vintage touring rally," said Ben Hsu, editor in chief of Japanese Nostalgic Car, and one of the coordinators of the event. "In Japan, touge most definitely refers to racing, whether timed, in touge battles, or drifting antics. Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on." Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on. We started the day on a mundane stop-and-go freeway drive from Mazda's Irvine headquarters to Escondido, me riding shotgun with my journalist co-driver in a 2016 Miata. But Mazda also brought along three heritage products on this trip – a 1985 RX-7 GSL-SE, a 1978 GLC three-door hatchback, and a 1975 REPU (rotary engined pickup) – serving as reminders of the company's history in the U.S. The group of Mazdas was joined in Escondido by many more Mazdas. And Toyotas, Hondas, Datsuns – so many 240Zs – and the odd Subaru and Mitsubishi. In total, 28 cars were at the start line. "We doubled the field this year, and made the route longer – 200 versus 120 miles," Hsu said. "We separated the cars into two run groups based on speed and a mix of makes and models." I spent the first part of the rally in the Mazda pickup to get a taste of rotary power. It was my first experience behind the wheel of a Wankel-powered vehicle, my first time driving a small Japanese truck from the '70s, and my God that thing has a lot of power. I had a few scares when I had to stand on the brakes, and I found the shift throw's immense length disconcerting – it felt like third gear engaged somewhere in front of the dashboard, with fourth somewhere in the bed. The truck was a great introduction to the rotary, however, and to '70s Japanese cars. Especially in Southern California, old Japanese cars aren't as novel to casual observers as they might be in other parts of the country.

2016 Mazda CX-5 recalled to address failing DRLs

Mazda announced Tuesday that it will recall more than 35,000 examples of the 2016 CX-5 crossover to address an issue that may lead to deterioration or failure of its LED daytime running lights.  In affected models, the gasket used to seal the wiring harness to the LED module was not manufactured to Mazda's specification. As it degrades over time, it can release sulfur, which in turn can potentially corrode the LED control circuit, causing the LEDs themselves to flicker, illuminate poorly or even fail outright.  Per Mazda, there is no alert for this condition, so drivers can potentially lose daytime running light function without realizing it, leaving them tougher to spot in poor light.  The campaign will cover 36,761 CX-5s sold in the U.S. and U.S. territories. Mazda says no accidents or injuries related to the issue have so far been reported.  This new campaign has not yet been published in the National Highway Transportation Safety Administration (NHTSA) recall database, and Mazda's statement did not include details of the proper remedy for the issue or when customers can expect to be contacted to arrange for service.  We expect that all 2016 CX-5s with LED DRLs will receive new harness gaskets and that those showing signs of LED module corrosion will have those replaced as well.  The 2016 CX-5 has been the subject of four other recall campaigns — including one for an improperly torqued steering knuckle bolt and another for a defective fuel filler pipe — but this is the first  new campaign for that model year since 2016.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.