2005 Mazda Mpv Lx - Florida Van Clean 7 Pass Front & Rear A/c Pwr Automatic 4-do on 2040-cars

Auto blog

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

Mazda on sales upswing in Europe but won't build there

Auto sales in Europe have been a tricky proposition for some years, but Mazda has seen some success on the backs of the CX-5 and new Mazda6. According to a report form Automotive News Europe, though, that doesn't mean we should be looking for the Japanese manufacturer to set up production operations there.
Mazda's European CEO, Jeff Guyton, explained to AN that "Our intention is to have manufacturing scale. That gives you scale economy and quality through repeatability." In other words, a big honking plant in one part of the world is preferable to a half dozen small factories building the same vehicles.
European sales for Mazda are up 5.4 percent in the first half of 2013, with 74,000 units sold. That kicked the Zoom-Zoom brand's market share up from one to 1.2 percent. Small gains, but gains nonetheless. According to Guyton, Mazda would need to sell 200,000 units of just one model in Europe for local production to make sense. Mazda's best European year saw 320,000 units sold across the entire range.

Mazda engineer explains why there won't be a Mazdaspeed3

When Mazda put the new, beautiful Mazda3 on its stand at last year's L.A. Auto Show, it didn't take long before someone asked about a Mazdaspeed3. It took even less time for the Japanese automaker's new global boss, Akira Marumoto, to cite his company's small size and say, " [My] answer would be no." During first drives of the compact hatch last month, Road & Track asked Mazda development vehicle engineer Dave Coleman what Mazda would need in order to resurrect an MPS version. Coleman detailed a few reasons for the Mazdaspeed's continued hiatus, the prohibitive cost foremost. But another hitch is that the Mazdaspeed we'd get now isn't the Mazdaspeed enthusiasts would want. Coleman told the magazine, "If we had an engine on the shelf that would fit that properly, then we could talk." But the price to develop an engine and supporting hardware to do the car right isn't in the budget for an automaker of Mazda's size. Perhaps more important, though, present-day Mazda wouldn't — and couldn't — whip up another raw, rapid hatch. The competition, and consumers, have changed. "Even the Mazdaspeed 3, in its last iteration, came out as raw as it did due to the constraints," Coleman said, and today's market won't put up with that kind of buzzy, excitable uncouth anymore. The question is, even if Mazda had the money, do the buyers pining for a zoom-zoomier Mazda3 want the mature, composed hot hatch they'd be offered? Head over to Road & Track to read Coleman's take on the matter, and how he lays out the gap that would swallow any potential MPS as, "What you think you want is rawness. What you really want is responsiveness and directness." Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.