2003 Mazda Mpv Se Factory Dvd Leather Gfx Package Needs Some Work Sold As Is on 2040-cars

Auto blog

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Mazda CX-5 getting mild refresh

Mazda has found both critical and commercial success with its CX-5 small crossover, and seems to be endeavoring to keep the momentum up with an upcoming refresh. As you can extrapolate from the obvious lack of the usual camouflage, the company isn't reinventing anything in the very near future of the CX-5, but it does seem as thought some tweaks are in the works.
Lighting elements fore and aft appear to have gone under the knife, with the front grille and rear fascia also seemingly to be slightly revised. The side mirrors now look slicker and slightly more upscale with their integrated turn signals, as well.
In all, expect a look that's a touch fresher, without being a radical departure from the existing visage.

Mitsuoka Rock Star is a Miata in a Chevy Corvette Sting Ray disguise

Mitsuoka is a famous (infamous?) Japanese custom car builder known for its absurd, and occasionally out-of-this-world vehicles. Its most iconic vehicle was the mid-engine Orochi, but its bread and butter are normal Japanese cars given front and rear styling from the past, usually sometime between the 1930s and 1950s. One of the more recent examples is the Mitsuoka Himiko, a Mazda Miata given a classic European roadster look. But the company has ventured a little further ahead in history with its latest model, the Mitsuoka Rock Star, which quite clearly is meant to be a C2 Chevy Corvette Sting Ray. The effect is actually pretty convincing, and as far as Mitusokas go, it looks smartly proportioned and a good fit for the base car. That base car is the current Mazda Miata, known as Roadster in Japan. It probably helps that the base Miata was designed with exaggerated fenders and creases from the get-go, so the even more exaggerated lines of the Corvette fit surprisingly well. Outside of the body, the car is pretty much identical to a regular Miata. It uses the same naturally aspirated 1.5-liter four-cylinder as all overseas examples. That means it makes just 129 horsepower and 111 pound-feet of torque, so this doesn't even come close to the fire-breathing power of real C2 Corvettes. Of course, that could be rectified with an LS V8 swap from Flyin' Miata. The engine is coupled to either a six-speed manual transmission or an automatic. The manual can also be had with a limited-slip differential. There are a number of available upgrades including custom colors for the body and the windshield surround. You can also add a custom leather interior with body-color coordinated panels. Mitsuoka will even provide retro-style wheels with white-letter BF Goodrich tires for the complete look. If you live in Japan and find this vehicle appealing, you'd better be ready to shell out plenty of cash. At current exchange rates, the base Rock Star starts at $41,636. The price goes up from there with options. In contrast, a base Mazda Miata here in the U.S. starts at $26,625, a little more than half that of the Mitsuoka. And of course, the U.S.-spec Miata is substantially more powerful. If you want the Mitsuoka, you'll also have to get in touch with the company quickly. There will only be 50 examples, and you have to apply for one. Related Video: News Source: MitsuokaImage Credit: Mitsuoka Mazda Convertible Performance mitsuoka