2003 Mazda Mpv Lx Standard Passenger Van 3-door 3.0l on 2040-cars
Hialeah, Florida, United States
Body Type:Standard Passenger Van
Vehicle Title:Clear
Engine:3.0L 183Cu. In. V6 GAS DOHC Naturally Aspirated
Fuel Type:GAS
For Sale By:Private Seller
Make: Mazda
Model: MPV
Warranty: Vehicle does NOT have an existing warranty
Trim: LX Standard Passenger Van 3-Door
Options: 7 Passenger Seating, AM/FM Radio, Alloy Wheels, Driver/passenger Side Sliding Doors, CD Player
Drive Type: FWD
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Mileage: 151,000
Power Options: Multi-Function Steering Wheel, Power Door Locks, Air Conditioning, Cruise Control, Power Locks, Power Windows
Sub Model: LX
Exterior Color: Green
Disability Equipped: No
Interior Color: Beige
Number of Cylinders: 6
If you have any questions or concerns call 786-459-4129
Mazda MPV for Sale
2003 mazda mpv lx standard passenger van 3-door 3.0l
2003 mazda mpv 51,314 miles dual sliding rear doors with power windows!!(US $6,900.00)
2003 mazda mpv 115k actual miles only clean title and c
3.0l front wheel drive tires - front all-season tires - rear all-season abs a/c
1996 mazda mpv dx standard passenger van 4-door 3.0l(US $4,000.00)
2002 mazda mpv es fully loaded(US $4,000.00)
Auto Services in Florida
Xtreme Car Installation ★★★★★
White Ford Company Inc ★★★★★
Wheel Innovations & Wheel Repair ★★★★★
West Orange Automotive ★★★★★
Wally`s Garage ★★★★★
VIP Car Wash ★★★★★
Auto blog
2019 Mazda MX-5 Miata First Drive Review | More power is the icing on top
Mon, Aug 13 2018SAN DIEGO — When Mazda announced that the 2019 Mazda MX-5 Miata was getting a serious increase in power, I was both excited and nervous. I was excited because more power is always exciting, and it was no insubstantial increase. At 181 horsepower, it's the most powerful production Miata ever offered, beating out turbocharged Mazdaspeed Miata's 178 horsepower. Plus it has more revs to play with. But what had me worried was whether this power would mess up the friendly, playful character of the Miata. The 155-horsepower 2.0-liter engine is just about perfect, almost universally loved by the Autoblog staff and other reviewers, with good midrange torque and short gearing that always made it feel quick in nearly every rev range. It felt like the right amount of power for the chassis, too. There was just enough to get it loose without working too hard, but it wouldn't spin you around unexpectedly. I could imagine a couple of ways the new engine could affect that sweet balance, too. A bit too much power could risk some of the Miata's accessibility and predictability. It might become more serious and less fun-loving. I also feared that in pursuit of a higher redline and more horsepower, the low-end of the rev range might become painfully slow. Honda owners know this feeling whenever their VTEC-equipped screamers drop out of the aggressive cam profile, and the Toyota 86 and BRZ suffer from an awful lack of torque right in the mid-range that doesn't recover until nearly redline. All of this was on my mind when the assembled reviewers were briefed by Mazda engineers about the car. It started out like most presentations, with a brief rundown of the goals of the car and what Mazda has done with the model so far. Then came a chart showing the power curves of the NC, current ND, and the 2019 model, and my fear of a loss of low-end grunt dissipated. The amount of power and torque over engine speed is nearly identical between the old and new ND Miatas right up to around 4,500 rpm. And then from there, the 2019 continues making more power all the way to its 181-horse peak at 7,000 rpm, 500 rpm higher than the previous model's redline. This was a good sign. Mazda managed to get these gains with no sacrifices through many small upgrades. The throttle body is wider with a slimmer throttle plate, the intake manifold has longer runners and dual paths, and the intake ports are larger.
Consumer Reports digs Mazda3, disses Jeep Cherokee
Tue, 11 Feb 2014Consumer Reports has just rendered its verdict on two of the more important cars to launch this year - the Mazda3 and the Jeep Cherokee. Considering the value a "Recommended" rating carries with the public and the viciously competitive markets these two cars compete in, Consumer Reports' view could have some impact on their initial success.
For Mazda, that's a good thing. CR spoke quite highly of the Zoom-Zoom brand's compact sedan and hatch, testing both models, and citing the excellent fuel economy and snickety-snack manual shifter as high points. Downsides to the 3 included a ride that is agile but "nervous," a bit too much noise and a cramped back seat. Still, the 3 was good enough to earn its place in the ranks of the "Recommended."
The Jeep didn't fare quite so well, with CR calling the polarizing CUV "half-baked." Although both engines were tested, the magazine called the 2.4-liter four-pot underpowered and its nine-speed automatic unrefined and unresponsive. That's particularly damning, considering the 9AT's role in future Chrysler products, including the extremely important 200. Overall, the Cherokee missed out on the coveted "Recommended" rating.
Mazda RT24-P brings KODO style to the Rolex 24 at Daytona
Thu, Nov 17 2016In addition to its new CX-5 crossover, Mazda revealed its new racecar, the RT24-P, at the Los Angeles Auto Show. The car has been designed for the Daytona Prototype international (DPi) class in IMSA's WeatherTech SportsCar Championship and will make its racing debut at the Rolex 24 at Daytona. It was designed using Mazda's KODO design language, which the brand has so successfully applied to its road-going cars. The racer's relation to Mazda's production cars is made obvious by the small five-point grille at the tip of the RT24-P's nose. While plenty of credit needs to go to the stylists and aerodynamicists at Mazda and Multimatic, one of the companies Mazda partnered with on the car, some of the credit needs to go to IMSA's new DPi rules for 2017. The new DPi class is very similar to the LMP2 class that it competes with in the WeatherTech series, with some noteworthy differences. The DPi class allows manufacturers to create unique bodies and engine packages for one of the four chassis available. The LMP2 class requires competitors to use the chassis companies' bodies, and are restricted to one engine package. View 14 Photos As for the powertrain, the Mazda RT24-P uses a turbocharged 2.0-liter four-cylinder that puts out roughly 600 horsepower. Mazda used the same engine in its P2-class race car last season. Mazda's body and engine will ride atop a chassis developed by Riley Technologies and Multimatic. You may remember that latter company as the one that developed the awesome spool valve shocks on the Chevrolet Colorado ZR2. The RT24-P will be campaigned by Speedsource, a company that has been racing Mazdas in American endurance racing for years, including last year's P2 cars. Considering Mazda's success in making such a cool race car, we're excited to see what other manufacturers do with the extra design freedom of the DPi class. Both Chevrolet and Ford competed last year in the WeatherTech prototype class with Daytona Prototype-style cars, and Honda competed with an LMP-style racer. Depending on what other makes decide, this year's WeatherTech line-up could have some nifty designs. Related Video: Related Gallery 2017 Mazda RT24-P race car View 9 Photos News Source: Mazda, IMSAImage Credit: Live photos copyright 2016 Drew Phillips / Autoblog Motorsports LA Auto Show Mazda Racing Vehicles Videos Original Video 2016 LA Auto Show