Fwd 4dr Grand Touring New Suv Automatic Gasoline 3.7l Dohc 24-valve V6 Engine Cr on 2040-cars

Auto blog

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Mazda zooms into SEMA 2016 with lighter MX-5 Speedster and RF Kuro concepts

It's almost time for the 2016 SEMA aftermarket show again, if you haven't guessed already by the steady parade of early looks at various show cars. Mazda's MX-5 creations are generally a highlight for us, unapologetic Miata junkies that we are. This year's cars should be just as exciting as last year's, one being a revision of last year's Speedster concept and the other based on the brand new, sexy RF retractable targa top model. Both SEMA MX-5s were designed and built in-house at Mazda's Irvine design studio. This year's Speedster is somehow even lighter than before. Mazda carved 100 pounds out of it, making it a staggering 350 pounds less than a production soft top model. It's also been repainted in a color called "White Ether", which we're imagining looks something like the "Blue Ether" paintjob on last year's highly reflective Speedster minus the blue tint. Mazda will probably never sell a roofless Miata or anything this lightweight, but maybe it should. It looks like it'd be a blast to drive at a road course. And then there's the RF Kuro concept, the first RF-based SEMA show car, which is shown in the teaser above. It doesn't seem terribly extreme, to be honest. It's wearing a matte charcoal paint, which explains the "Kuro" moniker – kuro means "charcoal" in Japanese. A set of 17-inch RAYS forged wheels and MX-5 Cup suspension, and that's about it. Not to knock it; the RF is a sexy looking thing as it sits, and Cup suspension should make it handle even more like a go-kart. Of course, both concepts will be fully revealed at the show next month in Las Vegas. Stay tuned for a dose of concept Miata hotness.Related Video:

2019 Mazda 6 gets more expensive, adds equipment and drops the manual

Update: We got wind of what Mazda had in store for the 2019 Mazda 6 in this report from last week, and now we have all the official information from Mazda. The news on the manual transmission's disappearance is still true — 2018 model year cars will be the last ones that make that an option. There are a few changes Mazda has implemented for this model year, and a slight price adjustment that goes with. The addition of Mazda's i-Activsense safety tech as standard is confirmed. As is G-Vectoring Control Plus, the next generation of Mazda's G-Vectoring we saw hit the CX-5 for the 2019 model year. Pricing has been adjusted to reflect the extra standard equipment and elimination of the manual transmission. A base (manual) 2018 Mazda 6 Sport costs $22,845 with its $895 destination fee, but the new 2019 model begins at $24,720 with the $920 destination fee included. That's a considerable increase, but the charge for an automatic transmission was $1,050 of that previously. Higher trim levels don't experience as much of a hike. For example, the maxed-out Signature is only $375 more expensive in 2019, coming in at $36,020 total. Mazda says the 2019 Mazda 6 goes on sale this month. It's a little surprising that 2019 model year Mazda 6s weren't already on sale, but mid-year updates or late introductions aren't exactly out of the norm for Mazda. Since its introduction, the current generation Mazda6 has always remained a top choice among driving enthusiasts. That's because it's one of the few cars left in its class to still offer a manual transmission, next to the Honda Accord. But sadly, it seems even that's going to disappear for the 2019 model year update. CarsDirect originally heard through the grapevine that the Mazda6 sedan will be losing its standard six-speed manual while gaining some new safety tech. At first, we here at Autoblog were in denial. We had to reach out to Mazda to verify this unfortunate news. And sadly, it seems CarsDirect's findings are accurate, with Mazda USA's marketing and brand communications manager, Drew Cary, replying to our inquiry with the following statement: At Mazda we are always listening to our fans, especially when it comes to what they are looking for from our vehicles. As we have moved the Mazda6 upscale with the launch of the Grand Touring Reserve and Signature models, we have seen less demand for a manual transmission option.