2020 Mazda Cx-9 Grand Touring on 2040-cars

Auto blog

Mazda's next-gen SkyActiv engines will drop spark plugs in favor of high compression

Homogeneous charge compression ignition, or HCCI, is the black art of internal combustion engines that aims to produce diesel-like fuel efficiency for the cost of gasoline. Although some of its competitors have developed and subsequently given up on the tech, Mazda confirmed that the next-generation of SkyActiv engines will employ HCCI technology, improving fuel economy by 30 percent and at the same time reducing exhaust emissions. According to Nikkei, a new SkyActiv family of engines is set to debut under the hood of the next-gen Mazda3 sometime in 2018 before making its way into other vehicles. In simple terms, an engine that uses HCCI burns the air/fuel mix using pressure instead of with spark plugs, just like a diesel. At 14:1, Mazda's gasoline engines already have some of the highest compression ratios out there, but a move to HCCI means cranking up the compression to 18:1. While the tech sounds relatively straightforward, using HCCI means dealing with a number of side issues. It's one of those "on paper" ideas that compounds problems when put into practice. Heat, revs, and fuel must all be carefully managed as gasoline doesn't burn the same way as diesel. Mazda is mum on details, but the automaker seems confident that the issues have been sorted. If the new engines do indeed make it to market with HCCI, Mazda will have out-engineered GM, Daimler, and Hyundai, all of which have tried and failed to develop HCCI engines in a cost-effective package. With the market moving towards electrification, it's interesting to see Mazda still focusing so heavily on traditional internal combustion gasoline engines. It's an indication of where they see the market heading for the next few years. Although the automaker has been hesitant to move forward with hybrid and electric powertrains, Nikkei also reports that Mazda will begin mass production of EVs in 2019. Related Video:

2016 Mazda CX-5 [w/video]

It's difficult for me to get excited about crossovers. I try hard not to be the stereotypical car guy: ignoring the fact that the rest of the world loves these tall hatchbacks, while yelling, "station wagons make more sense!" until I've voided my lungs of air. Deep down I am that guy, but I work around it. Historically the Mazda CX-5 is one crossover that has been quasi-immune to my knee-jerking. It doesn't weigh two tons, offers a manual transmission (in poverty spec, but still...), and looks faster than its competitors. Most importantly, the CX-5 can round a corner without wobbling like a Slinky at the top of the stairs. No item on that list of plaudits would likely crack the top ten "desirables" for average small CUV shoppers. So, for the 2016 update, Mazda instead upgraded the in-cabin experience along with the requisite nips and tucks to the exterior. I borrowed a 2016 model CX-5 to see whether or not those concessions to comfort affected the car-nerd stuff. And to see if the Mazda could still be my go-to CUV recommendation. Driving Notes The engine options are unchanged for 2016. You can still have the fine, 2.5-liter four-cylinder engine, with its 184 horsepower and 185 pound-feet of torque, or its wimpier 2.0-liter lil' brother. My fully spec'd Grand Touring came with the bigger engine, which feels adequately powerful for the class, but not quick. In an era where turbocharged engines are everywhere, revving the Skyactiv 2.5-liter up to its torque peak at 3,250 rpm takes some commitment. I'm annoyed that there's no manual offered with the 2.5L (a combo I can have in both the Mazda3 and Mazda6), but I don't hate the automatic transmission. The six-speed unit is unobtrusive 99 percent of the time; something I regretfully can't tell you about certain nine-speed autos. There are no paddles to play with, but you can tap the shift lever up and down if you're struck by a need for total control. With a new center console and dash, and the addition of the Mazda Connect infotainment system, the '16 CX-5 feels like a new vehicle from behind the wheel. An attractive, pliant, leatherish material swaths the neat console and surrounding real estate. And the perforated leather seats feel damn near upscale. I think that Mazda Connect's version of the central control knob (with handy adjacent volume knob) is almost luddite-proof in its simplicity. There's no latency between twisting and reaction on the screen.

Toyota will build new SUV at Alabama plant it's building with Mazda

WASHINGTON — Toyota Motor Corp said Wednesday it will build a new sport utility vehicle at its $1.6 billion joint venture assembly plant in Alabama rather than produce Corolla cars. The largest Japanese automaker announced in January 2018 it would build the factory in Alabama in a joint venture with Mazda. Toyota said the shift is due to "a growing consumer appetite for light trucks and SUVs." Mazda announced in February 2019 that it would build a new SUV at the plant. Toyota said it still expects the plan to start production in 2021. Construction remains on schedule, and hiring has begun. The plant could create up to 4,000 new jobs and build 300,000 vehicles annually. Corolla production will remain at Toyota's plant in Blue Springs, Miss.