2011 Mazda Cx-9 Touring 7-passenger Heated Leather 32k Texas Direct Auto on 2040-cars

Auto blog

Mazda Slovakia brochure reveals Skyactiv-X Euro power numbers

After driving a prototype of Mazda's Skyactiv-X engine in a Mazda3 in January last year, we wrote, "If you want to talk numbers, they're understandably fuzzy. The Skyactiv-X tune isn't final yet, so horsepower and torque figures are a moving target." They're no longer fuzzy in Slovakia, where a brochure for the new Mazda3 sells final figures as 181 metric horsepower and 222 Newton-meters, or 178 horsepower and 164 pound-feet. We don't know the Slovakian engine's displacement. If that Skyactiv-X is a 2.0-liter, it compares to our 2.0-liter Skyactive-G in the Mazda3 that makes 155 hp and 150 lb-ft, or the tuned Skyactiv-G in the 2019 Miata that makes 181 hp and 151 lb-ft. According to the spec sheet on the Slovakian Mazda site, their 2.0-liter Skyactiv-G in the CX-3 makes 148 hp and 152 lb-ft, and in their Mazda6 makes 162 hp and 155 lb-ft. According to the brochure, those numbers will rise to 164 hp and 157 lb-ft in the coming Mazda3. The Skyactiv-X numbers are in sight of what reps at Mazda in California gave us for output during our drive, which was closer to 190 hp and 180 lb-ft. Mazda said at the L.A. Auto Show last year that the Skyactiv-X would launch in markets with stricter emissions regulations first, so a small European market with tighter controls doesn't define what we get. Given our less restrictive environment, tuning for more power shouldn't be a moon shot. Doing so would put the Skyactiv-X in with the optional 2.5-liter four-cylinder in the U.S. Mazda3, which makes 184 hp and 185 lb-ft. The real test will be gas mileage; the purpose of the Skyactiv-X is to provide those figures in company with 20 to 30 percent better fuel economy than the Skyactiv-G. Autoweek characterized Mazda CEO Akira Marumoto's comments on the engine as, "The Skyactiv-X variant will be positioned as the higher grade. It will have the driving dynamics of the 2.5-liter gasoline setup but the fuel economy of a 1.5-liter diesel." We have questions about this strategy, but we'll have to see how the pricing works out. Since the 2.5-liter serves as the base engine on the 2019 Mazda3, buyers can expect a meaningful premium to get into a Skyactiv-X. Right now, there's a $1,495 surcharge to go from the current 2.0-liter Mazda3 hatch to the 2.5-liter.

Finalists for 2014 Green Car of the Year announced

The list of finalists for the 2014 Green Car of the Year has been announced, and in a genuinely bizarre twist, there's only one hybrid and no electric vehicles among the five contestants, despite the arrival of cars like the BMW i3 and Tesla Model S. Taking the place of the EVs are a pair of diesels, repping a technology that last won a Green Car of the Year award in 2009, when the Audi A3 TDI took the title. No diesel was in the running for last year's award.
Naturally, both of the diesel finalists are fielded by the Germans - with BMW's 328d and Audi's A6 TDI getting the nod. In the case of the 3 Series, BMW installed a 2.0-liter, turbodiesel, capable of delivering 180 horsepower and 280 pound-feet of torque, while returning 45 miles per gallon on the highway. Audi and its larger, 3.0-liter, V6 turbodiesel produce quite a bit more grunt, with 240 hp and 428 lb-ft of grunt, but net a very impressive 38 mpg on the highway in the A6.
Finalists for this year's awards include two diesels, three gas-powered cars and a plug-in hybrid.

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7