2010 Mazda Cx-9 Touring Htd Leather 3rd Row 7-pass 53k Texas Direct Auto on 2040-cars

Auto blog

New Mazda CX-4 teaser shots emerge ahead of Beijing debut

The Kodo styling language seen on last year's Koeru concept seems to translate well to a production car, judging by these teaser images of the upcoming CX-4 from Mazda's Chinese press site. And, as has been seen on several recent Mazdas, concept cars can be quite close to their eventual production versions. An earlier press release implies the CX-4 should be seen as a more coupe-like counterpart to the CX-5, with some of the MX-5's characteristic and often emphasized jinba ittai feel injected into it – if the MX-5 is all about the rider and horse being one, the CX-4 would just be a slightly bigger steed. The 19-inch wheels and LED headlights are some of the more attention-grabbing details on the car. Inside, there's a head-up-display and a MZD connect infotainment screen as seen on other current models. The hardware on the "Exploring-Coupe SUV", as Mazda call it, should match the CX-5: 2.2-liter SKYACTIV-D turbodiesels in some markets, 2.0 and 2.5-liter SKYACTIV-G gasoline engines in most. There will also be a choice of front-wheel-drive or all-wheel-drive. The Beijing Motor Show opens to the public on April 29th, so we won't have to wait a whole lot longer to see the whole thing. Related Video:

2019 Mazda CX-5 Turbo First Drive Review | Two-row crossover perfection

Listen: If you're shopping for a crossover, and by all accounts most Americans are, there is no better option on the market than the 2019 Mazda CX-5. When we test drove the all-new 2017 CX-5, we were astounded by its marked improvements over the already-great previous generation. We noted then its biggest drawback was its average 187 horsepower. The CX-5 didn't feel slow, and it certainly made up for it in other ways, like by delivering superior road-hugging abilities. But, it was probably enough to turn off buyers who do their shopping by analyzing spec sheets. For 2019, Mazda addressed that exact issue with a vengeance. With an all-new 2.5-liter SkyActiv Turbo good for 250 horsepower, the CX-5 not only leapfrogs bestselling rivals like the Honda CR-V and Toyota RAV4, but lands squarely in the realm of luxury stalwarts such as the Audi Q5 and BMW X3. When we drove the 2017 CX-5, we likened the handling to that of a Porsche Macan. Now it has the power to match. Among its direct competition, only the 2019 Toyota RAV4 breaks the 200-horsepower mark, ringing in at 203 (and the Hybrid makes an even more impressive 219 ponies), while the Honda CR-V, Subaru Forester and VW Tiguan all sit between 180 and 190. Now, to get the full herd you must fill the tank with 93 octane premium, but if you don't mind leaving a few ponies in the stable you can pump 87 octane for a slight dip to 227 horsepower. The engine adjusts with no ill effects. Even better, torque stays the same no matter what, and the stump-pulling 310 pound-feet of torque comes quick at just 2,000 rpm. The SkyActiv turbo is full of clever engineering tricks, too. There's an exhaust port restrictor, for instance, a narrower channel used only at low engine speeds. Mazda engineer Dave Coleman likened it to a thumb over a firehose, making more exhaust pressure at idle to spool up the turbo, and thus delivering more oomph when you take off from a standstill. Mazdafarians will recognize the mill as the same one that debuted on the 2018 Mazda6. It powers the CX-9 too, Mazda's highly acclaimed three-row crossover. The 3,825-pound CX-5 has 558 fewer pounds to shuffle around than its larger stablemate, making it downright snappy. However, that extra pep does come with a fuel economy penalty, 22 city and 27 highway mpg versus the naturally aspirated version's 24 city and 30 highway mpg.

50 engineers kept the rotary alive at Mazda for 8 years

The Mazda RX-Vision concept is one of the standouts at this year's Tokyo Motor Show thanks to a drop-dead gorgeous design and a revival of the Wankel engine. The fact that the rotary is still in development at Mazda is thanks to a dedicated group of 50 engineers. According to Automotive News, their dream for the last eight years has been to bring this storied engine design back to the street. It won't be easy. Because of its design, the rotary suffers from poor fuel economy and high emissions. Making the challenge even harder, Mazda reportedly only gives them a small budget, but they continue to chip away at the problem. "These 50 engineers want to develop the rotary engine, therefore they joined Mazda," company research and development boss Kiyoshi Fujiwara told AN. "If I stop the rotary engine, probably they want to leave." For the Skyactiv-R under the RX-Vision's svelte hood, the team reportedly started from the 16X rotary project. Dating back to 2007, that 1.6-liter engine was supposed to improve torque and fuel economy thanks in part to direct injection. After additional development, insiders even suggested that the engineers might have finally solved the powerplant's issues. However, Mazda never put the mill into production, and the RX-8 remains the company's last Wankel-powered model to be offered in showrooms. "We have a dream that one day, this design with a rotary engine will achieve a level that customers will accept," CEO Masamichi Kogai said to AN. Mazda is quite clear that the RX-Vision might never go on sale without a suitable rotary. Although if it does see production, the coupe would likely use a stiffened version of the Miata's chassis, AN reports. Before anyone can place an order, these 50 determined engineers still have a lot of work ahead of them. Related Video: