2006 Mazda Mx-5 Miata Sport Convertible 2.0l on 2040-cars

Auto blog

Mazda2 refreshed for 2020 with new style and tech

The North American market Toyota Yaris is a badge engineered version of the Mazda 2. Now, the Mazda underneath the Toyota badging has received some updates in its home market of Japan, and it will be interesting to see if or when the U.S. counterpart will be refreshed with any of these updates. The 2020 Mazda 2, now indeed called "Mazda 2" instead of the older Demio name on the Japanese market, has received new front end styling to bring it in line with bigger Mazda models. The grille and bumper are new, as are the headlights with adaptive LED technology and LED daytime running lights. Apparently the headlights are constructed out of 20 individually controlled LED blocks to optimize light output and direction, which sounds awfully interesting for this class of vehicle. The front end design, just like the new 16-inch alloy wheels, is Mazda-specific and the Yarisized version is unlikely to benefit from them, especially since the headlights are also different on the Toyota. Cabin materials have also been updated, and the driver’s seat is available with six-way power adjustability for 2020. The MZD Connect infotainment has Apple Carplay and Android Auto support, like the Yaris setup. In addition, cabin comfort is said to have been improved with better soundproofing, which is sometimes sorely needed in this class of cars. Safety and convenience features include adaptive cruise control, which is impressive on a city car, and the Mazda 2 also has the G-Vectoring Control Plus system for high-speed stability. Both the diesel and gasoline versions will get Mazda's i-Eloop brake energy regeneration system. The Japanese market also gets an all-wheel-drive version, which is surely a hoot despite only being available with the automatic transmission. CarAdvice says the Australian market will receive the redesigned Mazda 2 early next year, which is probably in line with the rest of the global market that gets it as a Mazda instead of a Toyota; Mazda says Japan market pre-orders have started today and official sales will begin on September 12th. It pays to remember that the base car dates back to 2014, and that the 2020 refresh is a facelift instead of a ground-up redesign. Assuming the usually expected shelf-life for the facelifted edition, the 2 will have racked up respectable mileage from the “DJ” generation bodyshell.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

Mazda Skyactiv-X Review | The revolution begins with a squeeze-bang

The matte black Skyactiv-X prototype looks like a rough Mazda3, perhaps reconstructed after a bad wreck by an over-enthusiastic owner of a spot welder and lots of gaffers' tape. Ribbed ducts poke out of the dash sending two breaths of conditioned air to no one in particular. Even its revolutionary engine, the thing we're here to experience, is entombed in a massive, nondescript cover to mask its unseemly noises. It's a wild, strange way to meet a very unconventional vehicle that promises diesel-like fuel economy, a wide torque band, and an exotic method for burning less gas than ever before. It takes a few hours for Mazda's engineers to explain the fundamental principles of operation. For more detail, read our Skyactiv-X Spark Controlled Compression Ignition explainer, but here's a very brief overview. Skyactiv-X marries some traditional gasoline engine characteristics with a novel form of compression ignition called SPCCI. The key for Skyactiv-X is to use very high compression in the cylinder and an extremely lean fuel-air mixture. Squeezed right to the cusp of getting hot enough to blow up all on its own (which is very hard to predict), a squirt of extra gas and a spark interject to cross that compression-ignition threshold in a controlled and predictable manner. See the animation below: That takes a few essential components to get just right. One is a massive amount of computer processing power and some pressure sensors in the individual cylinders, because the ambient conditions change how and when these things happen. Skyactiv-X uses a clutched supercharger to pump in additional air when needed to nail the mixture precisely, and high-pressure injectors to get the low ratios of fuel to disperse properly in the chamber. And since it operates like a conventional gasoline engine sometimes, it uses valve timing to lower the very high compression ratio so it doesn't reach combustion ignition in that mode. In practice, the Skyactiv-X runs in compression ignition mode most of the time. In practical terms, that means it drives like a torquey gasoline Skyactiv engine. The torque curve is broad and flat — diesel-like in that respect. That also means it can get away with using a six-speed transmission and a lower final drive for better response. There's enough grunt and economy together that Mazda can let the engine spin faster — at 60 mph, it's running at roughly 1,000 more RPM than a similar gas engine, with greater efficiency.