2010 Mazda Cx-7 I Sport Automatic Auxiliary Input Bluetooth Tpms Cruise Traction on 2040-cars

Auto blog

Flyin' Miata's 525-hp V8-powered ND finally hits the streets

Flyin' Miata, in its valiant quest to turn Mazda's roadsters into small, Japanese Corvettes, has finally finished its first V8-powered ND Miata. The company has been slowly teasing us with images and videos for months, but it wasn't until this week that the car finally made it to the streets. As soon as the current ND generation Miata was released, Flyin' Miata started the work to shoehorn a GM LS3 under the hood. The company has a history of building brutish, V8-powered Miatas. It sells everything from minor parts to full V8 conversion kits. For those with the cash that prefer to avoid the hassle, Flyin' Miata will sell you a complete, turn-key car. The price hasn't been finalized, but customers should expect to pay about $50,000 plus the cost of the MX-5. The new car has a worked-over LS3 that sends 525 horsepower to the rear wheels through a Tremec T56 transmission. Flyin' Miata says the rear differential comes from a V8 Camaro. Other new bits include exhaust, suspension, brakes, and a roll cage. Flyin' Miata tells us that the V8-swapped ND will weigh 2,592 lbs, a little more than 200 lbs more than the porkiest stock Miata. Despite twice as many cylinders and more than three times the displacement of the stock four banger, the LS3 V8 is a relatively small and lightweight engine. The finished car has a 53:47 front to rear weight distribution. Final touches are being finished, but cars and kits should be available soon. This article has been updated with some info straight from Flyin' Miata. Thanks, Keith! Related Video: News Source: Road & Track, Flyin' Miata Mazda Convertible Performance flyin miata

Evo pits Toyota GT86 vs. Mazda MX-5 Miata

The latest Deadly Rivals episode from Evo gets the Mazda MX-5 Miata and Toyota GT86 (our Scion FR-S) on track for a shakedown and a whole lot of drifting with Dan Prosser behind the wheel. The UK-spec coupes have slightly different power ratings than ours, but it's all close enough to be comparable. Their Miata has 158 horsepower (ours has 155), 148 pound-feet of torque, takes 7.3 seconds to run from naught to 60 62, and costs 22,695 pounds. The GT86, on the other hand, lists a 7.6-second dash to 60 62, and a base price of 25,000 pounds. The GT86 also weighs 400 pounds more than the Mazda. That's true in the States, too – curb weight for our MX-5 is 2,332 pounds, whereas the Scion FR-S comes in at 2,758 pounds. Both cars lauded for excellent shifting, but one of them has a better front end, a sweeter engine note, more controllable cornering behavior, and is faster by a tenth of a second around the test track. And Prosser doesn't mention it, but one has a lot more body roll. But it takes more than all that to make a winner, so check out the video above to see which is which. News Source: Evo via YouTube Mazda Scion Toyota Convertible Coupe Performance Videos toyota gt86 evo

Mazda's next-gen SkyActiv engines will drop spark plugs in favor of high compression

Homogeneous charge compression ignition, or HCCI, is the black art of internal combustion engines that aims to produce diesel-like fuel efficiency for the cost of gasoline. Although some of its competitors have developed and subsequently given up on the tech, Mazda confirmed that the next-generation of SkyActiv engines will employ HCCI technology, improving fuel economy by 30 percent and at the same time reducing exhaust emissions. According to Nikkei, a new SkyActiv family of engines is set to debut under the hood of the next-gen Mazda3 sometime in 2018 before making its way into other vehicles. In simple terms, an engine that uses HCCI burns the air/fuel mix using pressure instead of with spark plugs, just like a diesel. At 14:1, Mazda's gasoline engines already have some of the highest compression ratios out there, but a move to HCCI means cranking up the compression to 18:1. While the tech sounds relatively straightforward, using HCCI means dealing with a number of side issues. It's one of those "on paper" ideas that compounds problems when put into practice. Heat, revs, and fuel must all be carefully managed as gasoline doesn't burn the same way as diesel. Mazda is mum on details, but the automaker seems confident that the issues have been sorted. If the new engines do indeed make it to market with HCCI, Mazda will have out-engineered GM, Daimler, and Hyundai, all of which have tried and failed to develop HCCI engines in a cost-effective package. With the market moving towards electrification, it's interesting to see Mazda still focusing so heavily on traditional internal combustion gasoline engines. It's an indication of where they see the market heading for the next few years. Although the automaker has been hesitant to move forward with hybrid and electric powertrains, Nikkei also reports that Mazda will begin mass production of EVs in 2019. Related Video: