2007 Mazda Cx-7 Salvage Repairable Rebuilder Fixer Only 63k Miles Will Not Last! on 2040-cars

Auto blog

2019 Mazda3 gets only two engines in U.S.; here are details on suspension, AWD

We learned a lot about the 2019 Mazda3 hatchback and sedan when it made its debut at the L.A. Auto Show. It will still have a manual transmission, it will offer all-wheel drive for the first time, and it's a stunner inside and out. But we still had questions about some of the details, so we spoke with folks from Mazda, including a couple of engineers for details on engines, suspension and drivetrains. First off, of the five engines announced for the Mazda3, just two of them are slated for the United States. At launch, the Mazda3 will be offered only with a naturally aspirated 2.5-liter four-cylinder. It's mechanically pretty much the same as what you'll find in the Mazda CX-5 and Mazda6. It even features cylinder deactivation. The only real difference between this engine, its predecessor, and the one in other Mazdas is some minor engine tuning tweaks. Power is almost the same with 186 horsepower and 186 pound-feet of torque, gains of 2 horsepower and 1 pound-foot. Fuel economy is rated at 27 mpg in the city, 36 on the highway, and 30 overall for front-wheel-drive models. We would expect the all-wheel-drive model to have slightly worse fuel economy simply due to extra weight and having to power two extra wheels. The Skyactiv-X engine will become available later in 2019. It will be rolled out in Europe first, with America coming after. When it does come here, it will be offered in states with stricter emissions regulations before coming to other states. While we're on the topic of engines, we also probed a bit about the possibility of the turbocharged 2.5-liter engine coming to the Mazda3. We did get the typical response of not being able to comment on future product. However, they did confirm that the turbocharged engine does in fact fit in the new Mazda3, since it and the naturally aspirated engine are very similar, and the naturally aspirated engine still uses an enormous header, meaning turbo plumbing wouldn't be an issue. Everyone we spoke with at Mazda did emphasize that they are listening closely to buyers, which is what led to the turbo engine being offered on the Mazda6 and CX-5, as well as the introduction of all-wheel-drive to the Mazda3. So, if you, like us, want to see the turbo engine added to the Mazda3, let the company know. They might just do it. Now as for drivetrains, the company is still deciding which trims and which combinations of engines will be offered.

2020 Mazda6 starts at $24,920, $200 more than 2019 model year

Mazda increased the price of all five trims of the 2020 Mazda6 by $200. The entry-level Mazda6 Sport starts at $24,000 before $920 destination charge ($965 in Alaska), for a total of $24,920. The only changes for next year are a new key fob likely copying the black and shiny metal unit from the Mazda3, and a new Signature badge likely in the form of the elemental "Sg" pulled from the CX-5 Signature model. The three Premium Paint choices carry over, with the same prices: Snowflake White Pearl Mica for $200, Machine Gray Metallic for $300, and Soul Red Crystal Metallic for $595. Prices of the other four trims run:  Mazda6 Touring $27,580 Mazda6 Grand Touring $30,620 Mazda6 Grand Touring Reserve $33,120 Mazda6 Signature $36,220 We're awaiting word on the arrival of all-wheel drive and the 2.2.-liter turbodiesel fitted to the CX-5. In the CX-5, that engine makes 168 horsepower and 290 pound-feet of torque. An AWD Mazda6 showed up in paperwork filed with the National Highway Traffic Safety Administration in January 2018, spy shots of a diesel-powered sedan followed in May that year, and Mazda mentioned the oil-burner again in April this year. For the time being, power for the 2020 Mazda6 will continue to be sent to the front axle through a six-speed automatic — Mazda eliminated the six-speed manual for the 2019 model year. The Sport and Touring trims come with a 2.5-liter four-cylinder that makes 187 hp and 186 lb-ft. The Grand Touring, Grand Touring Reserve and Signature raise that to a turbocharged 2.5-liter four-cylinder with 227 hp on 87 octane gas, or 250 hp on 93 octane, and 310 lb-ft.

Are Toyota and Lexus planning to use Mazda's straight-six and new platform?

Japan's Best Car magazine has what appears to be a whopper of a rumor. The mag said it scooped Mazda's development of a straight-six engine that Mazda only revealed in March, the carmaker having buried the information in a financial statement. By way of Lexus Enthusiast and according to Google translate, Best Car writes that as it was speaking to a Toyota source on an unrelated matter, the magazine found out that Mazda's work on the straight-six was predicated on the engine's use in Toyota Group vehicles, which includes Lexus. Here's the account of how the engine and Mazda's coming front-engined rear-drive platform, dubbed "Large Architecture," will make their way to Toyota City: The first appearance for the straight-six, predicted to come in at a hair under 3.0 liters, is the Mazda Atenza/Mazda6 successor coming around 2022. The powertrain will get a 48-volt hybrid system for increased fuel economy, and the automaker's said to be considering a plug-in hybrid version. Toyota's first shot at the platform and the straight-six will be whatever fills the slot of the Japanese-market Mark-X sedan. We once had a version of the Mark-X in the U.S. as the Toyota Cressida. In Japan, it's sold as a rear- and all-wheel drive option to the Camry. The Mark-X is slated to end production in December this year — a "sporty four-door coupe" on Mazda's platform and with Mazda's engine eventually taking its place. Lexus has a number of plans for the components from Hiroshima. The next Lexus IS is said to evolve from the current sedan, using a Lexus V6 but migrating to Toyota's TNGA platform. Best Car says the IS after that, perhaps sometime around 2026, will hop onto Mazda's new platform and use the inline-six engine. Before that, the replacement for the Lexus RC in 2022 will sit on the Mazda platform and get that inline-six. What's more, Lexus will introduce a new model to slot between the $64,750 RC and the $92,950 LC employing Mazda's architecture and engine. Best Car says the model will act as a "next car" for RC owners, but we can't tell if the magazine means a two-door or a four-door coupe; the article also says the Lexus model will compete with the Audi A7. Toyota and Mazda partnered up in 2016 on technology sharing. Best Car's take is that, as was done on the Supra, Toyota is picking up all the tech it can from suitable sources so that it can continue to sell models that don't make sense to develop alone.