2021 Mazda Cx-5 Touring on 2040-cars

Auto blog

2017 Mazda CX-9 Prototype First Drive

If you read our coverage from last week's Los Angeles Auto Show, you'll note that we were extremely fond of the new Mazda CX-9. We like the look of the thing, inside and out, and it promises to be the best-driving entry in the three-row crossover class. We agree wholeheartedly with that claim. You see, we already drove it. Full disclosure: Our test of the camouflaged CX-9 prototype you see here was short, and while we were able to get a good handle on the CX-9's basic driving dynamics, it'll take more than a 30-mile session around the outskirts of LA to uncover the finer details. What's more, these vehicles are not production ready. In fact, according to our handlers at Mazda, the CUV we tested was actually at the stage before pre-production – so basically, a pre-pre-production car. That said, all the details about the engine, transmission, suspension, and steering are "largely final." As you can see in the gallery, the cars we tested were heavily camouflaged both inside and out. As for styling, we love it – see the undisguised pictures from the LA show for more views. And as for inside, we can say leather seats of our Grand Touring model were comfortable and supportive, and the smallish steering wheel felt natural in the hand. Even in pre-pre-production state, the CX-9 was impressively quiet. An extra 53 pounds of under-floor sound deadening, thicker windows, and active noise cancellation all contribute to what Mazda claims will be "among the quietest vehicles in its class." It's worth noting that the good sounds, like the throaty, whooshy noises of the turbocharged engine, found their way into the cabin just fine. The 2.5-liter, turbocharged four-cylinder engine – Mazda's first force-induced Skyactiv engine – is an excellent piece. The 2.5-liter, turbocharged four-cylinder engine – Mazda's first force-induced Skyactiv engine – is an excellent piece. It uses a variable geometry turbocharger, which the company calls a Dynamic Pressure Turbo. Here's how Mazda explains it: Imagine a normal garden hose. Put your thumb over the nozzle, and the force of the water increases dramatically. That's the DPT at low rpms. It features three small exhaust ports to direct exhaust gases into the turbo, making for 17.4 quick-spooling PSI at low rpms. As the revs climb, a flow control valve opens up, redirecting the gases to a trio of larger ports – removing your thumb from the hose, if you will – and keeping the boost up.

2014 Mazda3 breaks cover early, in Euro-spec at least

We're set to get a closer look at the US-spec 2014 Mazda3 later today, but AutoExpress has the first peek at the machine's European cousin (after initial leaks reportedly came from a Czech outlet). The photos show a compact that's taken plenty of design inspiration from its older sister, the Mazda6. That's excellent news, as the larger car's dynamic front fascia, accentuated fender arches and long nose translate well to the Mazda3. Inside, there are are new and improved material choices, and the longer wheelbase means occupants get to enjoy more room than before. There's also a larger trunk with 12.3 cubic feet of cargo capacity.
Buyers in the EU can get their hands on a 1.5-liter Skyactiv-G gasoline engine with 99 horsepower, though the old 2.0-liter four-cylinder will still be available in either 118 hp or 163 hp configuration. A 2.2-liter diesel tops out the engine choices.
The 2014 Mazda3 is lighter than its predecessor and boasts disk brakes and a multi-link rear suspension on every trim. That means this thing should be fun to shuffle around. Stay tuned for details on the US-spec variant later today, including a lot more images of the good-looking hatch.

Next Mazda MX-5 Miata to weigh a ton(ne), literally

Looking at recent spy shots of the fourth-generation Mazda Miata, it's obvious this sporty little roadster will grow in size compared to the current model, but it's also going on a diet. At the Tokyo Motor Show, Auto Motor und Sport sat down with Mazda executive Kiyoshi Fujiwara, who gave a little more insight into the Miata's redesign.
Fujiwara said that they're aiming for a curb weight of a tonne (metric ton), which is 1,000 kilograms or right around 2,200 pounds, for the next-generation Miata. This would make the roadster at least 300 pounds lighter than the current NC Miata, but still about 200 pounds heavier than the original NA.
There is no indication as to how Mazda will go about removing that much weight from the bigger car, but with as popular as the power retractable hard top (PHRT) model is on the current car, the new Miata may ditch this feature to lose its weight. Improving the power-to-weight ratio appears to be a key goal of the Mazda team, so we also wouldn't be surprised to see a more powerful engine underneath the longer hood.