2021 Mazda Cx-5 Carbon Edition on 2040-cars

Auto blog

Mazda's Apple CarPlay and Android Auto retrofit costs $199 plus labor

In relation to the rest of the market, Mazda was a bit behind with introducing Apple CarPlay and Android Auto to its model range, but it's trying to make up ground. But now, vehicles equipped with Mazda Connect from the 2014 model year and newer are eligible for a dealer-installed upgrade with smartphone integration capabilities. But it's not a free update. Mazda first introduced Carplay and Android Auto capabilities on the 2018 Mazda 6 and further extended the technology to the 2019 CX-9 and CX-5 utility vehicles. Now the company wants to make the smartphone interfaces available across the lineup. For $199, plus labor costs, owners can buy the upgrade. In addition to the updated Mazda Connect software, Mazda will also update hardware, including more powerful and faster-charging 2.1-amp USB ports. It is important to remember that Mazda's infotainment touchscreens do not function while driving, so even with Android Auto or Apple CarPlay, functionality will run through the command knob, buttons, or voice commands. For those interested in the upgrade, it is recommended to schedule an appointment for the upfitting. The service will take approximately two hours.UPDATE: A previous version of this story mistakenly said that Mazda's infotainment systems are not touchscreens. This is incorrect. The story has been updated accordingly.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2018 Mazda6 Turbo first drive

Mazda considering a 'hyper' Mazda3 with the 250-hp 2.5-liter turbo four

Mazda boss Akira Marumoto said last year there'd be no Mazdaspeed version of the new Mazda3 because the hot hatch segment wasn't a priority for the carmaker. Then Mazda engineer Dave Coleman told Road & Track that without "an engine on the shelf that would fit properly," an MPS variant made no sense. The first reader comment on our Coleman post read, "Engine — you have it; cue up the 2.5T." Mazda might have been listening. Program manager Kota Beppu told Autocar he'd like a "hyper" Mazda3, the outlet figuring the 2.5-liter four-cylinder turbo would make the most sense for power. Autocar wrote "the project had not been officially signed off, [but] insiders suggest that is a formality." When Car and Driver queried Mazda and its sources about the report, the magazine realized "the company is seriously considering a high-performance hot hatch." What's more, "Drew Cary, senior manager for brand communications, said, 'We encourage people to ask for it, though. Our planners and executives are watching and listening to fans.'" The turbocharged 2.5-liter SkyActiv-G four-cylinder — which doesn't sell in Europe — makes 250 hp on premium gasoline and 310 pound-feet of torque in the Mazda6, CX-5 and CX-9. A next-generation SkyActiv-G is predicted on the way next year, bringing more boost and power. Even as is, we're talking a chunky lump of power to send to the front wheels, and Beppu mentioned torque steer. The new Mazda3's all-wheel drive would alleviate that bugbear. Unlike the raw, fast-twitch reflexes of the last Mazdaspeed3 from 2013, Beppu says a new model "needs to be responsible and friendly ... more friendly than a Golf GTI." And, "It should be fast." The polished looks and interior address the necessary perceptions. CD's done the math on the current 2.5-liter and predicts a five-second sprint to 60 miles per hour, which is Volkswagen Golf R and Honda Civic Type R territory, so GTI comparisons could be a case of aiming low. Imagine a 300-hp engine with a touch more torque and a six-speed manual ... If Mazda follows through with such a product, it could take two years to get the green light. However, we're told that Mazda's Los Angeles research and development center has already built a proof-of-concept to encourage and anticipate that green light.

Watch what happens inside a rotary engine

Since it looks like Mazda may very well revive the Wankel rotary engine as a range extender for electric cars, there's no better time to become reacquainted with the quirky internal-combustion engine. And there's hardly a better way to become reacquainted than by peering into a running rotary engine, which you can do with the video above. The video comes to us from the YouTube channel Warped Perception. The channel has already shown what happens inside a conventional internal-combustion piston engine by putting a clear cylinder head on top of a flathead engine. This new video shows off the rotary engine by adding a clear side to a tiny model-airplane engine, something that we weren't aware existed and are glad to know about now. Despite the tiny size, the engine is functionally almost exactly like the bigger versions you'll find in Mazdas from about 1967 to 2012. It has intake and exhaust ports on the edges of the rotor housing, and the triangular rotor swings about in a peanut-shaped housing. For maximum effect, jump to right around the 7:40 timestamp. This is the point at which a bit of acetylene is added to the air-fuel mix for a brighter flame. It's at this point that you can really see when the mixture combusts and how the pressure of the flame pushes the rotor to produce rotational motion. Each stage of the video does slow things down to make everything as clear as possible. Even if you already knew how rotary engines worked, it's still fascinating to watch, first because it's something you don't get to see usually, and also because of the engine's elegant simplicity. Related Video: Image Credit: YouTube / Warped Perception Weird Car News Mazda Technology Videos rotary rotary engine