2019 Mazda Cx-5 Sport on 2040-cars

Auto blog

Mazda's Skyactiv-X power and efficiency ratings released in Europe

Mazda's long-awaited Skyactiv-X engine is finally headed for production, though not yet for the United States. The Japanese automaker says "various European countries" will get access to the unique engine in the Mazda3 starting this fall. Still, the announcement is relevant to the rest of us because we now have official power levels and fuel efficiency numbers that we can use to compare the Skyactiv-X with other engines offered in the compact Mazda. First, the power. According to Mazda, the 2.0-liter Skyactiv-X makes 178 horsepower and 165 pound-feet of torque. By way of comparison, the 2.5-liter Skyactiv-G engine currently used in the Mazda3 here in the States makes 186 hp and 186 lb-ft of torque. Sure, it's a little less powerful, but note that the displacements don't match and remember that the real reason the Skyactiv-X exists is to reduce fuel consumption. And that brings us to the Skyactiv-X's combined rating of around 53.5 miles per gallon (converted from liters per 100 kilometers). That's around 8 mpg better than the 2.0-liter engine that comes standard in Europe. Before we go any further, it's important to note that these numbers represent official figures for the European NEDC combined cycle, which means they are not directly comparable to the ratings we'll get from the United States EPA. Our official ratings will almost certainly be lower. With that disclaimer out of the way, the 2.5-liter Mazda3 scores a combined 30 mpg here in the States. The obvious unanswered question is when the Skyactiv-X might actually come to America. And the unfortunate answer is that we don't know. Mazda has yet to make an official decision on timing for the U.S market's launch of the engine, but as soon as we know, so will you.

2016 Mazda MX-5 Miata 2.0L First Drive [w/video]

The 2016 Mazda MX-5 Miata is easy to comprehend. It is an enthusiast roadster in its purest form. There's no need for any sort of sales pitch. You don't have to ramp up in order to get people excited about it. Say the words "new Miata" to anyone who cares about cars, and you've immediately got their attention. And now that I have yours, I'll to cut right to the chase. It's brilliant. That's a fact I've known for a while. I drove the Japanese-spec ND Miata in Spain earlier this year, with the 130-horsepower, 1.5-liter engine that we aren't getting in the United States. The new Miata is a modern day reincarnation of the original NA that stole our hearts in 1989. It's smaller and lighter than the outgoing NC, yet boasts more interior room. It's comfortable. It looks great. And it drives like a Miata should. In other words, it's perfect. So what about this US-spec car, then? It's got more power – 155 horsepower and 148 pound-feet of torque from Mazda's 2.0-liter Skyactiv four-cylinder engine. But it's also heavier. Our car weighs 2,332 pounds, compared to the roughly 2,200 pounds of the 1.5-liter car. Yes, the ND Miata loses 12 hp compared to the outgoing NC, but it's up 8 lb-ft of torque. Plus, according to Mazda, because of the improved powerband, anytime you're under 5,700 rpm the new Skyactiv engine is stronger than the old MZR mill. It's more efficient, too. With the manual transmission, the Miata is estimated to achieve 27 miles per gallon in the city and 34 mpg highway. That a jump of six mpg in both categories compared to the old six-speed. Consider this: The Japanese-spec car uses a 130-hp engine, which I found to be perfectly adequate. The increase in power for the US-spec car mostly just balances out the extra weight, but it also improves performance on the highway. Hit the throttle in sixth gear with the 1.5 and nothing happens. Do the same with the 2.0, and there's movement. Low-end power is far more important in the US than it is in other markets, and that's why our car has the larger engine. "North America is why the two-liter car exists," engineer Dave Coleman told me. Plus, 155 hp power means you eke out the Miata's dynamics at legal speeds. 45 miles per hour in an MX-5 is a far more exhilarating experience than that same speed in any supercar. So yeah, it's not powerful. But to paraphrase Jay-Z, the MX-5 is a super car, not a supercar.

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7