2014 Mazda Cx-5 Sport on 2040-cars

Auto blog

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Mazda rotary engine returning in 2019 as EV range extender, exec says

It seems that a range-extended Mazda electric car with a rotary engine is for real, and coming sooner than expected. An automotive news outlet from the Netherlands called AutoRAI spoke with Mazda's European vice president for sales and customer service. He told the outlet that Mazda has an electric car coming In 2019, and it will be available with a rotary engine as a generator. Among the details about this car and its powertrain, he said it would be similar in size to the Mazda3, and it might even be a crossover. It will also be based on Mazda's upcoming modular small car platform. The rotary engine will only generate electricity and will only have one rotor. Not only that, it will be mounted horizontally. This is particularly unusual as every rotary Mazda has had the engine mounted upright. We've reached out to Mazda representatives in the U.S. and Europe. An American representative couldn't comment on what type of range-extender options may be coming in the future. We say this specifically because Mazda has confirmed previously that an EV with an available range extender is coming in 2019. We have not heard back from a European representative at the time of publishing. Despite this, a return of the rotary as a range extender looks probable. Besides the dates fitting with Mazda's electric plans, there are other tidbits from the past that support the idea. Mazda has been experimenting with the idea for years, and even created a functioning Mazda2 EV with a rotary range-extender. The company has also filed patents in the U.S. for the setup as recently as last year, and there have been other recent rumors. Related Video: Featured Gallery Mazda RX-Vision Concept: Tokyo 2015 View 11 Photos Image Credit: Autoblog Auto News Green Rumormill Mazda Technology Emerging Technologies Electric Mazda rotary mazda ev rotary range extender

Long Road Racing will build you the Miata that Mazda won't

One of the frustrating things about new cars today is that many features are exclusive to this trim level, or that package. Even the enthusiast-friendly Miata has many restrictions how you can configure one, which can make choosing one a bit tricky. You can't have the cheapest one or the leather-clad one with a limited slip differential, for example. And adding aftermarket parts on your own runs the risk of voiding your warranty. Long Road Racing, however, has a possible solution for creating the ideal, warranty-covered Miata. You may not be familiar with Long Road Racing, but you probably heard about one of its most-publicized products, the MX-5 Cup car. The car was developed by Mazda with the intention of creating a global spec series, and Mazda reports that about 140 of the cars have been sold so far. Every single one of those cars went to Long Road Racing to be specced out for racing before reaching their customers. So the company is familiar with the car, and has applied its expertise to its "Ultimate MX-5" program. The way the program works is, once you've purchased a 2016 or 2017 Miata, you can send it to the company to have it customized to your needs. The company has an extensive list of parts to choose from, all of which have been selected by the company to work well together. But if you need something outside of its offerings, or just need help choosing from the list, you can get in touch with the company to discuss how best to achieve your goals. Long Road Racing will also customize any trim level of Miata, and can even create a Miata Mazda didn't offer. For instance, you could have a Grand Touring with the leather interior, but also with the limited-slip differential and Brembo brakes from the Club model. All of these parts are fully warrantied by Long Road Racing for the length of the OEM warranty, and they don't void the factory warranty. We had the opportunity to try out a car customized by Long Road Racing at the M1 Concourse track in Pontiac, Mich. The car was there to sample alongside some of the MX-5 Cup cars as well as several of Mazda's stock road cars to drive on course. The road-going Long car started as a Grand Touring model, and it retains its heated leather seats and automatic climate control.