2013 Mazda Cx-5 Touring Auto Sunroof Rear Cam 12k Miles Texas Direct Auto on 2040-cars

Auto blog

Meet our new long-term 2016 Mazda MX-5 Miata Club!

We have a new Miata! For a year! And yeah, we're excited about it. This adorable roadster was added to our fleet over a month ago, but we've just now stopped driving it long enough to tell you about it. You can watch our unboxing video for this new long-termer above. (Spoiler alert: The car in the box is a Miata.) Then read a little more about which options and features we chose and why. What we got We chose the mid-line Club model because it's the only way to get the suspension with Bilstein shocks, the limited-slip differential, and a shock-tower brace. Club also includes an appearance package with a front air dam, side sill extensions, a rear bumper skirt, and a ip spoiler for the trunk. We chose Ceramic Metallic paint because it's white and silver and awesome all at once. The only option we chose is the Brembo/BBS Package. In addition to the upgraded brake system and 17-inch wheels alluded to by the title, this package adds Mazda's advanced keyless entry – you can unlock the doors and start the car without taking the key-thing out of your pocket. The MSRP for the car is $32,835. What we skipped The Grand Touring trim (too fancy), the automatic transmission (too few pedals), and extra-cost red paint (not ceramic enough). Grand Touring adds lots of convenience stuff like rain-sensing wipers and auto climate, some active safety systems, and leather. We wanted the upgraded chassis instead, and we' were trying to save some (hypothetical) money. Why we got it Because it's a Miata, and we like fun. The plan is to drive the bleep out of it for a year and report on the experience along the way. We'll take it to a track or two, keep the top down as far into winter as possible, and then slap some snow tires on it to continue . Maybe at a slight angle relative to straight-ahead at times. We'll see. If you have questions about this car, leave them in the comments below and we'll address as many as we can during the coming months. Miata! Related Video:

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Are Toyota and Lexus planning to use Mazda's straight-six and new platform?

Japan's Best Car magazine has what appears to be a whopper of a rumor. The mag said it scooped Mazda's development of a straight-six engine that Mazda only revealed in March, the carmaker having buried the information in a financial statement. By way of Lexus Enthusiast and according to Google translate, Best Car writes that as it was speaking to a Toyota source on an unrelated matter, the magazine found out that Mazda's work on the straight-six was predicated on the engine's use in Toyota Group vehicles, which includes Lexus. Here's the account of how the engine and Mazda's coming front-engined rear-drive platform, dubbed "Large Architecture," will make their way to Toyota City: The first appearance for the straight-six, predicted to come in at a hair under 3.0 liters, is the Mazda Atenza/Mazda6 successor coming around 2022. The powertrain will get a 48-volt hybrid system for increased fuel economy, and the automaker's said to be considering a plug-in hybrid version. Toyota's first shot at the platform and the straight-six will be whatever fills the slot of the Japanese-market Mark-X sedan. We once had a version of the Mark-X in the U.S. as the Toyota Cressida. In Japan, it's sold as a rear- and all-wheel drive option to the Camry. The Mark-X is slated to end production in December this year — a "sporty four-door coupe" on Mazda's platform and with Mazda's engine eventually taking its place. Lexus has a number of plans for the components from Hiroshima. The next Lexus IS is said to evolve from the current sedan, using a Lexus V6 but migrating to Toyota's TNGA platform. Best Car says the IS after that, perhaps sometime around 2026, will hop onto Mazda's new platform and use the inline-six engine. Before that, the replacement for the Lexus RC in 2022 will sit on the Mazda platform and get that inline-six. What's more, Lexus will introduce a new model to slot between the $64,750 RC and the $92,950 LC employing Mazda's architecture and engine. Best Car says the model will act as a "next car" for RC owners, but we can't tell if the magazine means a two-door or a four-door coupe; the article also says the Lexus model will compete with the Audi A7. Toyota and Mazda partnered up in 2016 on technology sharing. Best Car's take is that, as was done on the Supra, Toyota is picking up all the tech it can from suitable sources so that it can continue to sell models that don't make sense to develop alone.