2dr Spyder G Coupe Cd Power Windows Power Locks A/c Adjustable Steering Wheel on 2040-cars

Auto blog

Maserati Quattroporte suits up with Ermenegildo Zegna [w/video]

You know what no one has ever said? The Maserati Quattroporte needs more Italian style. Just the same, Maserati has teamed up with Ermenegildo Zegna to give the QP just that.
Revealed here at the Frankfurt Motor Show is the (deep breath now) Maserati Quattroporte Ermenegildo Zegna Limited Edition Concept. And by "concept", Maserati means it intends to put it into production, likely with very few tweaks over what you see here.
So what do you see here? A QP in a business suit, to sum it up. It's got a beautifully deep bronze paintjob and an interior with the finest wool textile and soft leather upholstery. The lustrous paint repeats on the wheel spokes, and of course some discreet Zegna badges inside and out. The fashion house also worked up some special fitted luggage, as you can see from our gallery of high-resolution photos from the show floor, along with the stock shots, a video and a press release below.

Maserati MC20 spy photos show supercar in broad daylight

The upcoming Maserati MC20 mid-engine supercar has been teased a number of times, but thanks to new spy photos, we finally get a clear look at the prototype. Our spy photographer caught the MC20 in broad daylight from nearly every angle, and it was wearing relatively thin camouflage. The nose of the MC20 seems to take a lot of inspiration from past and present Maseratis. It has a slightly more aggressive oval grille that will house a big trident square in the middle. Two smaller grilles flank the center one. The headlights and hood design look slightly reminiscent of the MC12 supercar, which was based on the Ferrari Enzo. The lights have a similar shape that looks like it might wrap down around the sides of the fender. The little vents in the hood also call to mind the MC12. The sides of the MC20 aren't too over-the-top. It has two relatively small intakes in the rear fender, one upper and one lower. There's a small vent in the front fender. The body's lines are smooth and curvy. The rear pillar is fairly thick and the side skirts are rather deep. The wheels have quite a bit of vinyl covering, but they seem to have some sort of three-spoke or split three-spoke design. At the rear of the car, there are few wings, spoilers or other aerodynamic paraphernalia besides the simple rear lip to distract from the clean curves. What we can see of the taillights suggests thin, wide units with arrow-like points in the lighting elements. There appear to be plenty of vents for cooling and aerodynamics, and the twin tailpipes exit roughly in the middle and a bit inset to the edges of the car. While we don't know all the details about the car, we know a fair bit about what will power it. It will use a twin-turbo 3.0-liter V6 making 630 horsepower and 538 pound-feet of torque. It's also an in-house engine, not one built by Ferrari. There have been reports that the engine could see a hybrid version with multiple electric motors appear with over 700 horsepower, but it's also possible that those reports of an electrified engine could simply be referring to a 48-volt mild-hybrid assist that could be a part of the standard V6. We're expecting the regular V6 MC20 will be rear-wheel-drive with some kind of dual-clutch or conventional automatic transmission. If the high-output hybrid rumors are true, that version would likely be all-wheel-drive. We should know more when the car makes its debut this September. Related Video:    

Maserati details the new, 630-hp V6 that will power its mid-engined MC20 coupe

Maserati is done leaning on former sister company Ferrari for technical support. It has unveiled the six-cylinder engine it designed and will build in-house to power the MC20 supercar that's scheduled to make its debut later in 2020. Ferrari's willingness to develop and/or build engines for Maserati shrank significantly when it split from former parent company Fiat-Chrysler Automobiles (FCA) in early 2016 and became independent. Insiders knew the division would be spun off, so they began designing Maserati's new engine (which is called Nettuno) in 2015 and accelerated the process in 2017. It's a 90-degree, 3.0-liter V6 with a dry sump and a twin-spark, pre-chamber ignition system rooted in racing. In this application, it's twin-turbocharged (the turbos are mounted on the outside of the engine rather than in the middle of it) and it's equipped with both direct and indirect fuel injection.  All told, the 485-pound Nettuno engine develops 630 horsepower at 7,500 rpm and 538 pound-feet of torque between 3,000 and 5,500 rpm. It continues revving to a redline of 8,000 rpm.  Matteo Valentini, Maserati's chief engineer, explained the Nettuno engine will ultimately power the company's entire range of vehicles, though he stopped short of naming the specific models that will use it after the MC20. He added the six-cylinder will "bring Maserati back into the world of racing," meaning its output will likely grow in the not-too-distant future. We'll learn more about the engine when the MC20 makes its debut September 9. What remains to be seen is whether Maserati will replace the V8 available in the Levante and the Quattroporte, or if it will surf the downsizing wave sweeping across the industry. Developed jointly with Ferrari in the early 2010s, that engine makes 590 horsepower when it's bolted in the Levante Trofeo's bay, meaning its output is eclipsed by the Nettuno V6's. Both engines are built around a 90-degree architecture, so the 3.0-liter V6 could turn into a 4.0-liter V8 if it's modular enough to gain a pair of cylinders — and if Maserati sees a market for another eight-cylinder. Featured Gallery Maserati Nettuno 3.0-liter V6 engine Maserati Coupe Performance