2002 Lincoln Town Car Executive L Sedan 4-door 4.6l on 2040-cars

Auto blog

Ford recalls over 953,000 vehicles to replace Takata airbag inflators

DETROIT — Ford is recalling more than 953,000 vehicles worldwide to replace Takata passenger airbag inflators that can explode and hurl shrapnel. The move includes over 782,000 vehicles in the U.S. and is part of the largest series of recalls in U.S. history. Included are the 2010 Ford Edge and Lincoln MKX, the 2010 and 2011 Ford Ranger, the 2010 to 2012 Ford Fusion and Lincoln MKZ, the 2010 and 2011 Mercury Milan, and the 2010 to 2014 Ford Mustang. Some of the recalls may be limited to specific geographic areas of the U.S. Takata used the chemical ammonium nitrate to create an explosion to inflate airbags. But it can deteriorate over time due to heat and humidity and explode with too much force, blowing apart a metal canister designed to contain the explosion. At least 23 people have been killed worldwide and hundreds injured by the inflators. Ford says it doesn't know of any injuries in vehicles included in this recall. Dealers will replace the inflators. Ford will notify owners about the recall starting on Feb. 18, and the company has replacement parts available for dealers to order, said spokeswoman Monique Brentley. In previous Takata recalls, parts availability had been an issue. Owners can go to this Ford website and key in their vehicle identification number to see if their cars and SUVs are being recalled. The same information will be available soon at the NHTSA recall website. More than three years after the U.S. National Highway Traffic Safety Administration took over management of recalls involving Takata inflators, one third of the recalled inflators still have not been replaced, according to an annual report from the government and a court-appointed monitor. The report says 16.7 million faulty inflators out of 50 million under recall have yet to be replaced. And 10 million more inflators are scheduled to be recalled this month, including the Ford vehicles. Safety advocates said the completion rate should be far higher given the danger associated with the inflators. The recalls forced Takata of Japan to seek bankruptcy protection and sell most of its assets to pay for the fixes. The inflators grow more dangerous as they get older because ammonium nitrate deteriorates due to high humidity and cycles from hot temperatures to cold. The most dangerous inflators are in areas of the South along the Gulf of Mexico that have high humidity. Related Video:

Junkyard Gem: 1978 Lincoln Continental Town Car

Just before Ford downsized the Continental for 1980 and made the Town Car a separate model for 1981, the biggest and plushest new sedan in the Dearborn universe was the mighty Continental Town Car. Here's one from 1978, the second-to-last model year of the two-and-a-half-ton Continental Town Car, found in nice condition in a Denver car graveyard last month. This car rolled out of the Lincoln showroom loaded, with the landau-style "Coach Roof" and just about every additional option. Base price on the 1978 Continental with the Town Car package started at $11,606 (about $48,350 in 2020 dollars), but this car cost much more than that. A new Mercedes-Benz S-Class cost better than twice as much that year (and it was worth it), but you still had to be a heavy-duty high-roller to buy a new '78 Town Car. The base engine in the 1978 Continental was a 400-cubic-inch (6.6-liter) V8 making a grim 166 horsepower, a truly horrific ratio of 25.2 horsepower per liter of displacement (torque came to a respectable 319 lb-ft, though). If the new Navigator got 25.2 horses for each liter in its turbo V6, it would have a mere 88 horsepower to haul its nearly three tons, rather than the 450 horses that 21st-century engine technology gives us. The good news with this car is that it came with the optional 460-cubic-inch (7.5-liter) V8, rated at 210 horsepower and 357 lb-ft. That was sufficient to get this car's 4,660 pounds moving well enough. Still just 28 horses per liter, but a significant upgrade. These cars weren't about performance, however. They were about a silent, cushy ride and poofy seats that swallowed you in velour comfort. When did Detroit stop making these pillow-top seats? And opera lights? And snazzy "coffin-handle" door pulls? Yes, even the wire wheels (a $333 option, or $1,385 today) stayed on this car to the very end. Why get a Rolls-Royce when you could have this, the grille of this behemoth seems to ask us. Though it remained in good condition when it arrived in its final parking space, a Malaise Era Continental sedan just isn't worth much in the enthusiast world. Even a 1978 Mark V in nice shape would be hard-pressed to find a forever home nowadays. At least it had a chance to visit the Norman Rockwell Museum in Massachusetts before the end. In what came to look like a very smart move by Ford, in light of certain geopolitical events in 1979, the Panther-based 1980 Continentals weighed nearly a half-ton less than this car.

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.