1997 Lincoln Town Car Signature Sedan 4-door 4.6l on 2040-cars

Auto blog

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.

Ford F-150 could be affected by tornado-damaged supplier in S.C.

The disruption caused by a tornado that severely damaged a South Carolina auto-parts plant and killed a contract security guard last week could be felt by more automakers than just Ford and affect more than just its best-selling F-Series pickup, which is due for an update. And there’s still no estimate for when operations might resume at the plant. The Detroit Free Press reports that the BorgWarner plant in Seneca, near Greenville, makes transfer cases for F-150 and Super Duty pickups, the Ford Explorer and Expedition, Transit cargo vans, and Lincoln Navigator and Aviator SUVs. ItÂ’s also a supplier for the Ram 1500 and Toyota Tundra trucks. Transfer cases shift power from the transmission to the front and rear axles in four-wheel-drive vehicles. BorgWarner says it still has no update for when it might partially or fully resume operations. The tornado that ripped through the area in the western part of the state on April 13 tore the roof, walls and signage off the factory and killed a 77-year-old contract worker when the security building he was sheltering in collapsed. Only four or five others were inside the plant, which has been idled because of the coronavirus outbreak, when the tornado struck. In an SEC filing on Friday, Ford said it has sent employees to the site to help BorgWarner and assess the damage to FordÂ’s tooling. “Initial assessments indicate that the Ford tooling was not materially damaged in this incident,” Ford said in the filing. “We do not have sufficient information to estimate when the facility will be back on-line or whether or the extent to which this incident will impact our plans to resume production of four-wheel drive and all-wheel drive vehicles.” A Fiat Chrysler spokeswoman also told the Freep the company was working with BorgWarner on recovery plans. A Toyota spokesman told Autoblog that "we are collaborating with BorgWarner to help restore production for transfer cases for Tundra assembly. We are confident that theyÂ’ll fully recover over time." Like other automakers, Ford shut down production at its U.S. plants last month as a precaution against the coronavirus pandemic. But Ford hasnÂ’t yet said when it plans to reopen its factories. FCA is targeting May 4 to resume production. Models like the F-150 and Lincoln Navigator are major sources of profit for Ford, which estimated it lost $2 billion in the first quarter.

Next Lincoln Navigator to drop V8 in favor of V6, but Ford Expedition might get both

A great many buyers fled from full-size body-on-frame SUVs to car-based crossovers in large measure to save fuel. But that doesn't mean there's still not a buying audience for more traditional truck-based utility vehicles, and those consumers doubtlessly wouldn't mind saving some dollars at the pump, too. According to Motor Trend, those shoppers might be in luck.
That's because the magazine has confirmed that Ford isn't walking away from the full-size SUV segment, and it's poised to do something about its offerings' economy ratings, too. According to MT, global Lincoln director Matt VanDyke has hinted that the next Navigator may drop two cylinders and go with a V6 model - the current model gets just 14 miles per gallon in the city and 20 on the highway from its 5.4-liter V8. The obvious fitment would be Ford's 3.5-liter twin-turbo EcoBoost V6, an engine that has spread like kudzu throughout the rest of the Blue Oval's large vehicle lineup.
Downsized turbocharged engines like Ford's EcoBoost franchise have come under fire as of late for not delivering their EPA fuel economy ratings, but their benefits extend beyond consumption - the 3.5L offers superior power and a better torque curve than the naturally aspirated V8. MT also suggests that Ford's 3.7-liter V6 could form the base engine for the next Navi - it has similar horsepower but a lot less torque than the current 5.4L. That may be less of a problem with the next generation tipped to go on a diet, which could level the playing field somewhat.