Base 3.5l Bluetooth 263 Horsepower 4 Doors 4-wheel Abs Brakes Clock - Analog on 2040-cars

Auto blog

Weekly Recap: New bosses try to jump-start Cadillac and Lincoln

Both of America's domestic luxury brands seem to be stuck in neutral.
It's ironic that Cadillac and Lincoln got new bosses within days of each other this month. It's also a commentary on the fact both of America's domestic luxury brands seem to be stuck in neutral.

2021 Jeep Grand Cherokee L vs Big Three-Row Crossovers | Spec comparison

The three-row 2021 Jeep Grand Cherokee L is here, entering an ever-growing segment of big crossovers that Jeep has ignored since the Commander of the late 2000s. Of course, the Dodge Durango has basically been a three-row version of the current Grand Cherokee with Dodge styling and a different interior, so it's not like The Corporate Entity Formerly Known as Chrysler has been without a contender in the segment. Jeep is a stronger brand than Dodge, however, and the three-row midsize segment is stronger than those with two rows (there's a vast sales difference between the Chevrolet Traverse and Blazer, as well as the Honda Pilot and Passport). In other words, the Grand Cherokee L could be a very big deal. It is also, quite literally, a very big deal. As you're about to see, it is now the largest three-row crossover, besting the length, wheelbase and height of even the gargantuan Traverse. There's more to the story than that, however, so we put together the below comparison chart to show you how the new Grand Cherokee L lines up on paper versus the biggest three-row crossovers. That includes the 2021 Ford Explorer, 2021 Kia Telluride, 2021 Hyundai Palisade and 2022 Chevrolet Traverse. This group also represents some of the strongest entries in the segment as well as those we feel are most likely to be considered alongside the big Jeep. To that end, we also included the 2021 Lincoln Aviator in the chart since its base price is actually less than what we anticipate the luxurious, range-topping Grand Cherokee L Overland and Summit trim levels to start.  Engines and drivetrains Note the differences in curb weight here. The Grand Cherokee L has the highest base curb weight of the group apart from the high-lux Aviator, yet its 3.6-liter V6 has the least amount of power and torque. Therefore, it'll be surprising if it's not the slowest in the group. There's of course the Hemi V8 available on the top Overland and Summit trim levels, but again, a hefty curb weight works against it. At 5,330 pounds, the lightest V8-powered JGCL weighs 600 pounds more than V6-power Explorer Platinum and ST models. On the other hand, nothing can touch the Hemi Jeep's towing capacity, and only the 400-hp Aviator betters the Jeep's base V6. Its 6,200-pound towing capacity greatly outdoes the 5,000-pound limits of not only the Telluride, Palisade and Traverse, but most others in the segment as well.

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.