2012 Lincoln Mkz Base Sedan 4-door 3.5l on 2040-cars

Auto blog

Mustang parts under the new Lincoln Aviator mean good things for Ford

NEW YORK — As we mentioned last night, underneath the new Lincoln Aviator "concept" there appears to be an independent rear suspension lifted right from the Ford Mustang parts bin. And while it's pretty cool on its face that Mustang rear-drive platform bits are being reused in the broader Ford universe, what this means for the next Explorer could be really cool. A quick caveat: The Aviator here in New York is very close to the production version, but it's not technically a production car. It looks hand-built, with temporary exhaust and some show-car touches. The suspension underneath looks exactly like a Mustang's, but the actual production Aviator will almost certainly use beefier components with the same basic design and geometry, since the Aviator will be much heavier than the smaller Mustang. That being said, we're fairly confident that even at this early stage, the Mustang-derived suspension seen in New York is a preview of what'll be under the production Aviator. Furthermore, Ford won't say it, but based on what we're seeing on Aviator, it's a safe bet that Ford will utilize the Aviator platform for the next Explorer. That would enable the economies of scale necessary to produce a brand new rear-drive-based SUV platform in the first place. It also means that the Explorer should be available without AWD — and given the stable of powerful EcoBoost engines, and the competent 10-speed automatic in the parts bin, a rear-drive Explorer has a shot at being a decent driver. Aviator wouldn't go rear-drive-based if driving dynamics weren't important; Explorer should inherit these priorities. More evidence: The Explorer spy shots we saw back in February sure share the Aviator's general proportions. Even back then, before Aviator was revealed, we were hypothesizing that an EcoBoost 3.5-liter-powered version could boast as much as 400 horsepower, if the Expedition's tune were adopted. Suddenly, the Explorer seems very interesting. So, an EcoBoost, rear-drive Explorer sure sounds like something Ford Performance would be interested in, right? We knew an Explorer ST is coming, but with 365-400 horsepower potential and a chassis designed with dynamics in mind, it doesn't seem like as much of a stretch as the Edge ST. And a performance-oriented AWD system is a possibility, too. That's an area where Ford has been gathering experience at a rapid pace. What do we not expect from a new Explorer? A V8.

Slew of Ford recalls affect more than a million vehicles

Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19. The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it's probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.  The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle's wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford's reference number for this is 20S56. The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford's internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly. Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue.

Ford recalls 1.3 million Fusions, MKZs: Steering wheels could come off

When driving a car, the steering wheel is only expected to move in a rotational fashion, either clockwise or counter-clockwise. When it moves in some other direction, something is wrong, and when it moves the wrong way enough that it is no longer attached to the steering column, that's a really, really bad thing. And apparently, according to a recall issued by Ford, there are over 1.3 million Ford Fusions and Lincoln MKZs that are at risk of this happening. And at least two accidents and one injury have been attributed to the issue. Ford says the problem is that the steering wheel bolt that keeps the wheel attached to the column might not provide enough torque, resulting in the bolt slowly loosening and working its way off the column. The good news is that the fix is really simple. Ford will install a larger bolt with more threads along with a larger nylon patch to keep it all locked down. The fix is completely free to owners. Cars affected by the recall include 2014 to 2017 Fusions built built at the Flat Rock plant in Michigan between August 6, 2013, and February 29, 2016. Model year 2014-2018 Fusions and MKZs built at the Hermosillo factory in Mexico are also affected. So if you have one of those sedans, please get in touch with your local dealer to have the issue addressed. Related Video: