2011 Used 3.5l V6 24v Automatic Fwd Sedan on 2040-cars

Auto blog

Junkyard Gem: 1988 Lincoln Mark VII LSC

The Lincoln Division put the Continental Mark VI on the Panther platform for the 1980 through 1983 model years, making it much smaller than its vast Mark V predecessor but not much nimbler and certainly not as opulent. For the 1984 model year, though, the new Continental Mark VII moved onto the Fox platform, making it sibling to the Mustang and therefore more of a true high-performance luxury coupe. By 1986, the Continental name was gone from the Mark VII (relegated to Lincoln's cushy land yachts), and the LSC version came with the same hairy V8 as the Mustang GT. Today's Junkyard Gem is one of those cars, found in a Denver yard last month. For the 1988 model year, the base Mark VII got the axe, leaving only the Bill Blass Edition and the LSC. Sadly, the Bill Blass Mark VII didn't come with an inflatable Sherman tank. For 1988, all Mark VIIs came with the 225-horsepower 5.0-liter High Output V8 engine, same as the Mustang GT.  Could you get a manual transmission? Sadly, you could not. Swapping one into one of these cars is pretty easy, but the more likely swap has always been to grab the 5.0 out of a Mark VII and drop it into a non-V8 Fox Mustang. If you were shopping for a BMW 5-Series or Mercedes-Benz E-Class in 1988, the Mark VII offered an attractive Detroit alternative. The 1988 LSC cost $25,016 (about $58,200 in 2021 bucks), while a new BMW 528e cost $31,500 and had a mere 127 horsepower. The M5 had a wild six with 256 horses— 31 more than the Mark VII— but it cost a terrifying $46,500. Meanwhile, the Mercedes-Benz 260E offered just 158 horses and cost $37,250. Granted, both of the Germans offered manual transmissions, but approximately zero American luxury-car buyers actually wanted three pedals by the late 1980s. Truth be told, this car looked like a great value next to its Teutonic competitors at the time, more so than GM's and Chrysler's efforts of the late 1980s. Not quite 150,000 miles on the clock on this one. The Mark series continued through the Mark VIII and then that's all she wrote, Katie bar the door. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Here's how you turn the ordinary into the extraordinary. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. To appreciate the Mark VII LSC, you must do three things: 1. Drive it. 2. Drive it. 3. Drive it. Related Video: This content is hosted by a third party.

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

Ford recalls 9,900 vehicles across two campaigns

Ford is recalling a total of 9,885 vehicles in two campaigns. The Basics: In one recall, Ford will recall 9,017 examples of the 2013 Escape with build dates from January 11, 2012, to April 1, 2013, and the 2013-2014 Focus ST produced between May 3, 2012, and October 14, 2013. The Problem: Splices in the engine wiring harness might not have enough compression, and this can cause the manifold absolute pressure sensor to send incorrect signals to the powertrain control module. This issue could cause the engine to stall. Injuries/Deaths: None reported. The Fix: Dealers will replace the current crimped splices with new splices, according to the National Highway Traffic Safety Administration. If You Own One: The repair campaign will begin on January 4, 2016. More Information: Ford recalled the 2013 Escape and Focus ST in August 2014 for the same problem, and this is an expansion of that campaign, according to company spokesperson John Cangany to Autoblog. The Basics: In the smaller of the two campaigns, Ford will recall 868 examples of the 2013 Explorer, Explorer Police Utility, Taurus, Taurus Police Interceptor, Flex, Lincoln MKS, and MKT. The Problem: The fuel delivery module can crack, which would cause a fuel leak. Injuries/Deaths: None reported. The Fix: Dealers will replace the fuel delivery module. If You Own One: Owners should receive notice soon because NHTSA's report says the recall begins in December. More Information: According to Cangany, this recall is an expansion of a campaign from 2013 for these vehicles. RECALL Subject : Engine Wiring Splices may cause Stall Report Receipt Date: DEC 02, 2015 NHTSA Campaign Number: 15V813000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 9,017 All Products Associated with this Recall Vehicle Make Model Model Year(s) FORD ESCAPE 2013 FORD FOCUS 2013-2014 Details Manufacturer: Ford Motor Company SUMMARY: Ford Motor Company (Ford) is recalling certain model year 2013 Escape vehicles manufactured January 11, 2012, to April 1, 2013, and 2013-2014 Focus ST vehicles manufactured May 03, 2012, to October 14, 2013. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM). CONSEQUENCE: The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.