Leather Panoramic Roof Factory Warranty Rear A/c Parking Sensors Off Lease Only on 2040-cars

Auto blog

Ford recalls Explorer and Lincoln MKC for fire hazard

The Basics: Ford will recall 5,536 examples of the 2016 Explorer and 2015-2016 Lincoln MKC. The Explorers have build dates between October 20, 2014, and January 28, 2016, at the Chicago Assembly Plant. The MKCs are from between November 25, 2013, and January 25, 2016, at the Louisville Assembly Plant. In total, there are 3,129 total affected examples of the 2015-2016 Lincoln MKC and 2,407 examples of the 2016 Ford Explorer. Of these, 1,543 are in the US and 3,993 are in Canada. The Problem: The combination of the engine block design and the block heater in these vehicles can cause the part to overheat when plugged in. Injuries/Deaths: None reported, but there are two cases of underhood fires in Canada. If you own one: Ford will begin notifying owners during the week of May 16, company spokesperson John Cangany tells Autoblog. Related Video: Ford issues safety recall for certain 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to replace engine block heaters Ford is issuing a safety recall for approximately 5,500 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to remove the heaters and replace them with an updated design. The engine block design, coupled with the particular block heater installed in these vehicles, causes the unit to be susceptible to overheating when the vehicle is parked and the block heater is plugged in –increasing the risk of an underhood fire. Ford is aware of two reports of underhood fires in Canada, but is not aware of any accidents or injuries related to this issue. Affected vehicles include certain 2015-2016 Lincoln MKC vehicles built at Louisville Assembly Plant, Nov. 25, 2013 through Jan. 25, 2016 and certain 2016 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 20, 2014 through Jan. 28, 2016. There are 5,536 vehicles affected by the issue, including 3,129 2015-2016 Lincoln MKC and 2,407 2016 Ford Explorer vehicles, with 1,543 of the affected vehicles in the United States and federalized territories and 3,993 in Canada. Dealers will remove and replace the engine block heater with an updated design and, if needed, replace the cord at no cost to the customer.

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.

2017 Ford Super Duty trucks recalled because the fuel tank could fall off

Bad news from Dearborn. Ford just announced a pair of recalls, including a particularly worrying flaw in the new F-Series Super Duty. According to Ford's official announcement, there are roughly 8,000 of its big trucks on the roads with a missing reinforcement bracket – if it's not there, the fuel tank could separate from the frame. Yes, Ford is basically saying the fuel tank could fall out. We don't need to explain why this would be a very bad thing. Fortunately, no owners have experienced said bad things – Ford claims it's unaware of any fires, injuries, or accidents resulting from the flaws. The Kentucky Truck Plant built the affected pickups between August 10 and September 17. The bulk of the vehicles are in the US – 7,103, to be precise. Another 964 are cruising around the frozen Canadian tundra, while two more are in "federalized territories." The other recall is smaller, but reaches across a broad swath of the Blue Oval's family vehicles. Ford says there are 1,352 Taurus sedans, Flex crossovers, Explorer SUVs – including the Police Interceptor Utility variant – and Lincoln MKTs equipped with the company's 3.5-liter EcoBoost V6 that could catch fire. In this case, the danger isn't a detached fuel tank, but an "improperly brazed turbocharger oil supply tube" that could leak and spill engine oil on the turbocharger. Again, Ford isn't aware of any fires, accidents, or injuries due to the flaw. Here's the breakdown of manufacturer dates and location: 2016 Ford Taurus vehicles built at Chicago Assembly Plant, Oct. 18, 2016 to Nov. 2, 2016 2016-17 Ford Flex vehicles built at Oakville Assembly Plant, Oct. 18, 2016 to Nov. 10, 2016 2017 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 15, 2016 to Nov. 12, 2016 2017 Ford Police Interceptor Utility vehicles built at Chicago Assembly Plant on Nov. 2, 2016 2016-17 Lincoln MKT vehicles built at Oakville Assembly Plant, Oct. 18, 2016 to Nov. 10, 2016 As with the Super Duty recall, most of the affected cars, crossovers, and SUVs are in the US market. There are 126 units in Canada and six in the same "federalized territories" mentioned above. In the case of both recalls, dealers will inspect the affected parts and replace or add them as necessary. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.