1969 Lincoln Continental Base 7.5l on 2040-cars

Auto blog

Ford recalls over 680,000 Ford Fusions, Mondeos, and Lincoln MKZs for seat belt pretensioners

Update: We spoke with a Ford representative who said that owners will be notified by mail during the week of January 16 . Dealers will also have the fix available at the same time. Owners can bring in their vehicles to dealers for an evaluation in the mean time. The main text has been updated to reflect this. The Basics: Ford is recalling 680,872 2013-2016 Ford Fusions, 2015-2016 Ford Mondeos, and 2013-2015 Lincoln MKZ s for an issue with front driver-side and passenger-side seat belt pretensioners. The Problem: The seat-belt pretensioners did not have sufficient insulation applied. When the pretensioners are activated, the heat generated can cause the cables connected to the belts to separate, which in turn can prevent the seat belts from effectively restraining the occupant. This can lead to injuries. Injuries/Deaths: Ford reports two accidents and two injuries have occurred that are related to this recall. The fix: A dealer technician will inject an insulation coating around the pretensioner. This should effectively keep the heat away from the cables, ensuring the seat belt will properly restrain the user in a collision. If you own one: Affected owners will be notified by mail on the week of January 16. Dealers will have the fix available that week, and owners will be able to bring in their vehicles for the fix to be implemented free of charge. Related Video:

Ford and Lincoln recall about 170,000 vehicles over defective rear-view camera

Ford and Lincoln have jointly issued a safety recall that includes nearly 170,000 vans and SUVs built between the 2018 and 2023 model years. The vehicles included in the campaign are equipped with a rear-view camera whose image can cut out while the driver is backing up. Assigned recall number 23V-598 by the National Highway Traffic Safety Administration (NHTSA), the campaign includes the following cars: 7,649 units of the 2020-2023 Aviator fitted with the standard rear-view camera and built from October 19, 2019, to August 17, 2023. 70,600 units of the 2018-2021 Navigator fitted with the 360-degree camera and built from March 16, 2017, to December 23, 2021. 66,740 units of the 2022-2023 Transit fitted with either camera system and built from February 26, 2021, to August 17, 2023. 24,468 units of the 2021 Bronco fitted with the 360-degree camera and built from September 23, 2020, to December 22, 2021. Ford explains that the defect is present in all of the 169,277 vehicles included in the campaign. While these are different cars equipped with different technology, they all suffer from the same problem. The company explains that "customers may intermittently experience either a rear camera blue image or a full blue or black image on the SYNC [infotainment system] screen when the vehicle is placed in reverse, or when the 360-degree view is selected and available." It adds that losing the camera's image while backing up increases the risk of the crash. The cause of the problem varies from model to model. Ford has narrowed it down to the camera hardware, the wiring retention, and the Image Processing Module - V (IPMB) software. It adds that "fretting corrosion causes tin oxide formation on the internal camera connector due to [a] thermally-induced micro-movement between the tin-plated contact surfaces," and that the rate of tin oxide accumulation depends on factors such as the temperature and the humidity. It has also traced some of these issues to a problem during the manufacturing process. Ford will begin notifying owners of affected vehicles by mail on October 2. When parts are available, owners will be asked to bring their van or SUV to an authorized dealer so that a technician can replace the rear-view camera. Transit models included in the campaign will also receive a software update. Owners who have already paid to fix the problem can claim a reimbursement until June 30, 2024. This isn't Ford's first rear-view camera-related recall.

Electric Lincoln Corsair-E coming in 2026, report says

An electric Lincoln Corsair is on the way, Automotive News reports. It’s currently scheduled to arrive in 2026 and will be built at the Oakville, Ontario, assembly plant. Automotive NewsÂ’ source for this information is AutoForecast Solutions LLC, an automotive global forecasting company. “At this point, weÂ’re not sure if it will completely replace the Corsair or if there will be an equivalent gas-powered Corsair. But they would be on two different platforms,” Sam Fiorani, vice-president of AutoForecast Solutions, told Automotive News. The vehicle is currently going by the name of Corsair-E. ItÂ’s no surprise to see that it would require a new platform to build. The Corsair is currently riding on the Ford EscapeÂ’s platform, and the highest level of electrification seen there is a plug-in hybrid variant. This electric Corsair will be one of many EVs/electrified vehicles being manufactured at the Oakville plant in the coming years. It was announced late last year that Ford would build five new electrified models there this decade, with the first scheduled to roll off the assembly line in 2025 and the last in 2028. This could mean full EVs or hybrids, but the split is unknown so far. Ford still isnÂ’t talking about its specific plans with this Canadian plant. Automotive News received the standard, Ford “does not comment on future products” response when it queried the Blue Oval. In the meantime, anyone wanting their electrified Lincoln Corsair fix can find it in the Corsair Grand Touring PHEV going on sale soon.  Related video: