1965 Gray Runsdrivesnicely Interbody Vgood Needsminorfinish! on 2040-cars

Auto blog

Ford Mustang, F-150, Expedition, and Lincoln Navigator recalled

The Basics: Ford will recall 201,900 examples of the 2011-2012 F-150, 2012 Expedition, 2012 Mustang, and 2012 Lincoln Navigator. The affected vehicles have the 6R80 transmission. Of the total, there are 84,000 of them in the United States and 17,900 in Canada. The Problem: The output speed sensor on the vehicle's transmission lead frame can force the gearbox to downshift into first gear. If this happens at high speed, it could cause the rear tires to slide or lock up. Injuries/Deaths: There are no reported injuries, but Ford know of three accidents related to this problem. The Fix: Dealers will update the powertrain control module software to eliminate the problem, and they'll also replace the transmission lead frame. If You Own One: Ford will begin notifying affected customers by mail on May 23. Related Video: FORD MOTOR COMPANY ISSUES THREE SAFETY RECALLS AND TWO SAFETY COMPLIANCE RECALLS IN NORTH AMERICA DEARBORN, Mich., April 27, 2016 – Ford Motor Company is issuing three safety recalls and two safety compliance recalls in North America. Details are as follows: Ford issues safety recall and customer satisfaction program for certain 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles in North America to update powertrain control module software and inspect for certain diagnostic trouble codes Ford is issuing a safety recall for approximately 202,000 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles for a potential issue with the output speed sensor on the vehicle's transmission lead frame. Under certain conditions, the transmission controls could force a temporary downshift into first gear. Depending on the speed of the vehicle at the time of the downshift, the driver could experience an abrupt speed reduction that could cause the rear tires to slide or lock up. This condition could result in loss of vehicle control, increasing the risk of a crash. Ford is aware of three reports of accidents and no injuries related to this condition. Affected vehicles are equipped with a 6R80 transmission and include certain 2011-2012 Ford F-150 vehicles built at Dearborn Truck Plant and Kansas City Assembly Plant, Aug. 19, 2011 through March 9, 2012; 2012 Ford Expedition vehicles built at Kentucky Truck Plant, Aug. 19, 2011 through Dec. 19, 2011; Ford Mustang vehicles built at Flat Rock Assembly Plant, Aug. 19, 2011 through Feb.

2017 Ford Super Duty trucks recalled because the fuel tank could fall off

Bad news from Dearborn. Ford just announced a pair of recalls, including a particularly worrying flaw in the new F-Series Super Duty. According to Ford's official announcement, there are roughly 8,000 of its big trucks on the roads with a missing reinforcement bracket – if it's not there, the fuel tank could separate from the frame. Yes, Ford is basically saying the fuel tank could fall out. We don't need to explain why this would be a very bad thing. Fortunately, no owners have experienced said bad things – Ford claims it's unaware of any fires, injuries, or accidents resulting from the flaws. The Kentucky Truck Plant built the affected pickups between August 10 and September 17. The bulk of the vehicles are in the US – 7,103, to be precise. Another 964 are cruising around the frozen Canadian tundra, while two more are in "federalized territories." The other recall is smaller, but reaches across a broad swath of the Blue Oval's family vehicles. Ford says there are 1,352 Taurus sedans, Flex crossovers, Explorer SUVs – including the Police Interceptor Utility variant – and Lincoln MKTs equipped with the company's 3.5-liter EcoBoost V6 that could catch fire. In this case, the danger isn't a detached fuel tank, but an "improperly brazed turbocharger oil supply tube" that could leak and spill engine oil on the turbocharger. Again, Ford isn't aware of any fires, accidents, or injuries due to the flaw. Here's the breakdown of manufacturer dates and location: 2016 Ford Taurus vehicles built at Chicago Assembly Plant, Oct. 18, 2016 to Nov. 2, 2016 2016-17 Ford Flex vehicles built at Oakville Assembly Plant, Oct. 18, 2016 to Nov. 10, 2016 2017 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 15, 2016 to Nov. 12, 2016 2017 Ford Police Interceptor Utility vehicles built at Chicago Assembly Plant on Nov. 2, 2016 2016-17 Lincoln MKT vehicles built at Oakville Assembly Plant, Oct. 18, 2016 to Nov. 10, 2016 As with the Super Duty recall, most of the affected cars, crossovers, and SUVs are in the US market. There are 126 units in Canada and six in the same "federalized territories" mentioned above. In the case of both recalls, dealers will inspect the affected parts and replace or add them as necessary. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.