2015 Lexus Rx 350 on 2040-cars

Auto blog

Are Toyota and Lexus planning to use Mazda's straight-six and new platform?

Japan's Best Car magazine has what appears to be a whopper of a rumor. The mag said it scooped Mazda's development of a straight-six engine that Mazda only revealed in March, the carmaker having buried the information in a financial statement. By way of Lexus Enthusiast and according to Google translate, Best Car writes that as it was speaking to a Toyota source on an unrelated matter, the magazine found out that Mazda's work on the straight-six was predicated on the engine's use in Toyota Group vehicles, which includes Lexus. Here's the account of how the engine and Mazda's coming front-engined rear-drive platform, dubbed "Large Architecture," will make their way to Toyota City: The first appearance for the straight-six, predicted to come in at a hair under 3.0 liters, is the Mazda Atenza/Mazda6 successor coming around 2022. The powertrain will get a 48-volt hybrid system for increased fuel economy, and the automaker's said to be considering a plug-in hybrid version. Toyota's first shot at the platform and the straight-six will be whatever fills the slot of the Japanese-market Mark-X sedan. We once had a version of the Mark-X in the U.S. as the Toyota Cressida. In Japan, it's sold as a rear- and all-wheel drive option to the Camry. The Mark-X is slated to end production in December this year — a "sporty four-door coupe" on Mazda's platform and with Mazda's engine eventually taking its place. Lexus has a number of plans for the components from Hiroshima. The next Lexus IS is said to evolve from the current sedan, using a Lexus V6 but migrating to Toyota's TNGA platform. Best Car says the IS after that, perhaps sometime around 2026, will hop onto Mazda's new platform and use the inline-six engine. Before that, the replacement for the Lexus RC in 2022 will sit on the Mazda platform and get that inline-six. What's more, Lexus will introduce a new model to slot between the $64,750 RC and the $92,950 LC employing Mazda's architecture and engine. Best Car says the model will act as a "next car" for RC owners, but we can't tell if the magazine means a two-door or a four-door coupe; the article also says the Lexus model will compete with the Audi A7. Toyota and Mazda partnered up in 2016 on technology sharing. Best Car's take is that, as was done on the Supra, Toyota is picking up all the tech it can from suitable sources so that it can continue to sell models that don't make sense to develop alone.

Toyota recalls 337,000 RAV4s and HS250h models for tie rod failure

UPDATE: The post has been updated with additional information from NHTSA. The Basics: Toyota is recalling 337,000 2006-2011 model year Toyota RAV4 crossovers built between October 31, 2005 and September 7, 2010 as well as 2010 model year Lexus HS250h cars built between July 6, 2009 and August 26, 2010. The Problem: When either an affected RAV4 or HS250h is given an alignment and the tie rod adjustment nut on the rear control arm isn't tightened properly, the threads on the tie rod can start to rust. If this happens, the nut may break off and throw off the alignment drastically and suddenly. This isn't a case of the car simply pulling to one side, either. This would seriously upset the balance of the car and could cause the driver to lose control and crash. This is also the third time these vehicles have been recalled for the same issue. Injuries/Deaths: It's unknown if this control arm issue has resulted in any injuries or deaths. Autoblog reached out to Toyota for more information, but a company representative told us that the company isn't able to discuss injuries or deaths caused by this issue (if any) at this time. Based on information from NHTSA documents, it does not appear that any crashes, injuries or deaths have been attributed to the defect addressed in the current recall. The Fix: The dealer will completely replace the rear suspension assemblies at no cost to the owner. The tie rods and nuts will also be coated in epoxy to prevent future rusting from occurring. According to Car and Driver, the previous recalls involved tightening nuts, coating decent tie rods in epoxy and completely replacing rusted ones. The car magazine reports that further complaints were filed and the company is now replacing all components regardless of condition. If you own one: Toyota will notify owners of affected cars by mail. Owners can also check whether their cars are affected by entering the VIN at safercar.gov/vin. Owners with questions can also reach Toyota customer service at 1-800-331-4331 or Lexus customer service at 1-800-255-3987. Related Video: Featured Gallery 2012 Toyota RAV4 View 16 Photos News Source: Car and Driver, Toyota, National Highway Traffic Safety AdministrationImage Credit: Toyota Recalls Lexus Toyota Safety lexus hs 250h lexus hs250h

Lexus LF-NX Concept takes aim at the small crossover herd [w/video]

Lexus is drawing crowds with its sharply styled LF-NX Concept, a car that previews a competitor for the likes of the BMW X1, Mercedes-Benz GLK (also debuting at Frankfurt) and Audi Q3. We previewed the LF-NX last week, but we've since gotten a bit of in-person time with the compact crossover on the Frankfurt show floor.
There's a lot of show-car tinsel here, but the makings of a production model are fairly visible. That trademark Lexus face, with the separate headlight and running light arrays and an even more extreme version of the "spindle" grille, is present and accounted for. The styling is sliced and carved, like the Lexus IS, although it's difficult to tell if the production model will be quite so extreme in its looks. We'll bet yes.
Take a look above for the full set of live images from Frankfurt, then scroll down for video and some of the stock images from the original, online unveiling. Finally, click over for our complete coverage of the LF-NX from its debut, last week.