2010 Lexus Rx350 Climate Seats Sunroof Nav Rear Cam 92k Texas Direct Auto on 2040-cars

Auto blog

Drifting on a frozen lake with a studded Lexus looks like fun

Sometimes you come across a list of ingredients and you don't even need to know what's being made, you just know you need to be there when it's done. So if you saw a recipe for a Vimeo video that was one snow-covered frozen lake, one Lexus IS, four studded tires, two ice fisherman and one guy lounging on a couch, do you think you'd have any questions?
We didn't. The dish was cooked up by the Wide Open Drift Team and KSP Productions, and it's exactly what you'd think it is. Right down to the guy on the couch. We're glad we got to partake, and you can too in the video below.

Lexus RX450h+ mysterious patent filing hints at plug-in hybrid

Lexus entered the hybrid segment before a vast majority of its rivals, but it has timidly stayed away from the plug-in hybrid arena. Trademark documents filed in Europe suggest that's going to change sooner rather than later. Toyota's luxury division asked the European Union Intellectual Property Office to protect the RX450h+ nameplate, and it was granted the trademark in October 2020. It noted the name will be used on "automobiles and structural parts thereof," meaning it's likely going to be a nameplate. It's a familiar one, but the plus makes a big difference. Lexus already sells a car named RX450h; it's a hybrid version of the fourth-generation RX crossover, which is its best-selling model by a significant margin. Unverified reports claim the plus after the h will denote a plug-in hybrid model that will be powered by an evolution of the gasoline-electric powertrain found in the Toyota RAV4 Prime. It will put at least 300 horsepower under the driver's right foot, and it should be capable of driving on electricity alone for approximately 40 miles, a figure which will put it near the top of its class. It'll be reasonably quick, too. Rumors are a dime a dozen in the automotive industry, and a trademark filing should never be mistaken for a promise to release the model it details, but this report is more credible than most. Lexus has previously confirmed it will release its first plug-in hybrid model in the early 2020s after shunning the technology for years, and putting the powertrain in the RX makes sense. It sells well (about 111,000 units found a home in the United States in 2019), and it's a relatively big model so it's reasonably easy to equip with a battery pack. It's worth mentioning that the smaller NX should receive the same powertrain and a similar name in the not-too-distant future, too. Lexus hasn't commented on the trademark filing, and it hasn't publicly announced plans to release a plug-in hybrid variant of the RX (pictured) or of the NX. If the report is accurate, the crossover will likely make its public debut in the coming months. Whether it will be sold in the United States remains to be seen, however. Related Video:

Lexus resurrecting SC name for big, expensive coupe

Lexus is preparing the SC nomenclature for its third act, after the first bombshell SC coupe from 1991 and the second, Desperate Housewives hardtop convertible evolution from 2001. The brand is aiming again for something that makes a deep mark, with rumored specs pointing to a large, heavy, powerful coupe that will square its spindle grille up against the Mercedes SL and BMW 6 Series. It will be built on the frame of the next-generation LS sedan, and Automobile says internal combustion motivation will come in three flavors. The starter will be a juiced-up version of the company's 5.0-liter, naturally aspirated V8, the one that currently makes 467 horsepower in the RC F. Stepping up from there will be some kind of hybrid powertrain good for around 500 horsepower; last year Motor Trend wrote that the hybrid would be based around a V6 ICE with Toyota's coming "multi-hybrid" system. The top step will be a twin-turbo version of the V8 that could exceed 600 hp. Early reports of dimensions have it at 185 inches long, 75 inches wide, and 53 inches tall. It is expected to use the world's first application of a ten-speed automatic transmission. It'll also get the RC F's torque vectoring mechanism for the rear-wheel-drive setup, though Car and Driver says an all-wheel drive option "might be added later." Aluminum and carbon fiber components will help manage weight. Its design will be inspired by the LF-LC concept, and right now its pricing is as murky as its looks. C/D posits an MSRP from $80,000 to $95,000, Automobile figures it will go "past the $100,000 mark," and MT pegs the situation at $150,000. All agree, however, that it will join the retail pipeline as a 2017 model.