10 Smoky Granite Ls-460 Sedan *power Heated & Cooled Seats *keyless Go *low Mi on 2040-cars

Auto blog

Lexus IS 250 to get new turbo four?

"All show, no go." That's how I described the 2014 Lexus IS 250 F Sport that you see above, when I reviewed it back in November. Don't get me wrong, there's a lot to like about the new IS, but the 204-horsepower, 2.5-liter V6 in the IS 250 is not on that list. In my review, I suggested that Lexus ought to get on the bandwagon of offering a small-displacement, turbocharged, four-cylinder engine in its base IS (like its rivals), and now the folks at Motor Trend are furthering that discussion.
Lexus pulled the wraps off its new NX 200t crossover at the Beijing show recently, and it'll be the first vehicle in the company's lineup to use a brand-new - you guessed it - 2.0-liter turbo-four. With 238 horsepower and 258 pound-feet of torque on tap, that represents a healthy increase over the 204 hp and anemic 185 lb-ft currently being offered with the 2.5-liter V6, and we imagine the fuel economy gains will be rather significant, too. For comparison, the Lexus' four-pot power numbers are very close to the 240 hp and 255 lb-ft offered in the same-sized engine that BMW uses in the 328i.
Motor Trend also posits that Lexus may consider changing the base IS' name from 250 to 200, or perhaps 200t, to properly reflect the new engine's displacement. Of course, that's assuming Lexus doesn't pull a BMW or Mercedes-Benz, and no longer has its alphanumeric names properly reflect the size of the powerplant found underhood.

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

Toyota recalls 337,000 RAV4s and HS250h models for tie rod failure

UPDATE: The post has been updated with additional information from NHTSA. The Basics: Toyota is recalling 337,000 2006-2011 model year Toyota RAV4 crossovers built between October 31, 2005 and September 7, 2010 as well as 2010 model year Lexus HS250h cars built between July 6, 2009 and August 26, 2010. The Problem: When either an affected RAV4 or HS250h is given an alignment and the tie rod adjustment nut on the rear control arm isn't tightened properly, the threads on the tie rod can start to rust. If this happens, the nut may break off and throw off the alignment drastically and suddenly. This isn't a case of the car simply pulling to one side, either. This would seriously upset the balance of the car and could cause the driver to lose control and crash. This is also the third time these vehicles have been recalled for the same issue. Injuries/Deaths: It's unknown if this control arm issue has resulted in any injuries or deaths. Autoblog reached out to Toyota for more information, but a company representative told us that the company isn't able to discuss injuries or deaths caused by this issue (if any) at this time. Based on information from NHTSA documents, it does not appear that any crashes, injuries or deaths have been attributed to the defect addressed in the current recall. The Fix: The dealer will completely replace the rear suspension assemblies at no cost to the owner. The tie rods and nuts will also be coated in epoxy to prevent future rusting from occurring. According to Car and Driver, the previous recalls involved tightening nuts, coating decent tie rods in epoxy and completely replacing rusted ones. The car magazine reports that further complaints were filed and the company is now replacing all components regardless of condition. If you own one: Toyota will notify owners of affected cars by mail. Owners can also check whether their cars are affected by entering the VIN at safercar.gov/vin. Owners with questions can also reach Toyota customer service at 1-800-331-4331 or Lexus customer service at 1-800-255-3987. Related Video: Featured Gallery 2012 Toyota RAV4 View 16 Photos News Source: Car and Driver, Toyota, National Highway Traffic Safety AdministrationImage Credit: Toyota Recalls Lexus Toyota Safety lexus hs 250h lexus hs250h