2014 Lexus on 2040-cars

Auto blog

2019 Lexus ES is first mass-produced car to replace side mirrors with cameras

Concept cars have been trying to replace side mirrors with cameras for decades, and now Lexus is actually going to do it on a production car. There's one important caveat though: It's only for Japan. First implemented for the recently redesigned (and recently reviewed) 2019 Lexus ES, the side mirrors are being replaced with small, aerodynamic camera stalks. Those small cameras tucked into the stalks provide a constant video feed to five-inch screens placed at the base of the car's A-pillars. The biggest reason manufacturers are pushing this kind of tech is to improve aerodynamics. Swapping those side mirrors out for something much smaller creates less drag, and ultimately, better fuel economy. Lexus says there are a couple other advantages for going digital here too. For one, the camera modules are able to resist the accumulation of raindrops and snow due to their design. There's also less wind noise since the mirrors cut through the air so well. This will become even more important as silent electric cars trickle their way onto the market. The actual visibility is supposed to be better as well. Lexus says that the view is "enhanced" when you activate a turn signal, and helps provide better rearward vision when put into reverse — think Honda LaneWatch, but way cooler. We won't be seeing this futuristic-looking side mirror technology in the U.S. for some time, because it's still not legal here. The technology is legal to use in Europe, but Lexus says it'll only be offered in Japan for the time being. Audi, though, will be bringing its side camera mirror technology to Europe by the end of the year with the E-Tron. There's still no release date on the electric SUV, but it might be the first to market with the tech on that continent. Audi wants to bring side mirror camera technology to the U.S. in its E-Tron, but the regulations still need to be changed to allow that here - the E-Tron is expected to be for sale in the U.S. sometime in 2019. Buyers in Japan will be able to scoop a Lexus ES with the tech this October. Related Video:  

Production Lexus NX leaked in Jim Lentz presentation?

Before kicking off the Detroit Auto Show, the Society of Automotive Analysts had Toyota CEO Jim Lentz come on stage to say some words about the future of the auto industry, as well as what's coming for Toyota. While this type of information would normally stay off our radar, a video of his speech likely gives us our first look - albeit low-res - at the production version of the Lexus NX compact crossover.
In the video recorded by AmericaJR, Lentz refers to the turbocharged LF-NX Concept that was on display at the Tokyo Motor Show, but comparing this image to our gallery from Tokyo, there are clear differences between the two vehicles. These include the toned-down shape of the spindle grille, lower fascia crease and door mirrors as well as a headlight design that more closely resembles that of the 2014 IS sedan and the newly introduced RC coupe. From what we can see of the rest of this image, the NX should retain some of the LF-NX's angular side body creases. The vehicle you see above basically looks ready for production.
If this is in fact the NX, then reports of a Geneva debut for the luxury crossover seem even more accurate. The entire video is posted below, but the NX comes on screen around the 10:40 mark.

Lexus RC F is a predatory sport coupe with a 450-horsepower beating heart

Take a look at that face. We can't be the only ones who see an automotive Predator staring back, right? Certainly, the Lexus RC F Coupe boasts a visually striking design that some are going to love and others are going to hate, but we can at least appreciate that it's aggressive, especially compared to the standard RC Coupe that we saw at the Tokyo Motor Show. And with good reason - there's a 5.0-liter V8 engine sitting under that massively domed hood with "more than 450 horsepower," along with a newly calibrated eight-speed automatic gearbox.
Interestingly, Lexus has tuned the RC F's engine to run on an Atkinson cycle under most circumstances, while it switches to the more typical Otto cycle when more power is required, presumably using some sort of advanced variable valve timing technology. Helping put that power to the ground with all those ponies wreaking havoc underhood is a torque vectoring differential, a first from Lexus.
Also involved in keeping the RC F planted is an aero package that includes wings and ducts galore. The headline bit is an active rear wing that deploys at 50 miles per hour and retracts back into the deck when the car drops back to 25 mph. A clear-coated carbon fiber roof can optionally join that carbon rear wing. There are apparently going to be three 19-inch wheel options, including the ones you see in our live image gallery above.