2008 Lexus Gx 470 4wd 4dr on 2040-cars

Auto blog

Production Lexus NX leaked in Jim Lentz presentation?

Before kicking off the Detroit Auto Show, the Society of Automotive Analysts had Toyota CEO Jim Lentz come on stage to say some words about the future of the auto industry, as well as what's coming for Toyota. While this type of information would normally stay off our radar, a video of his speech likely gives us our first look - albeit low-res - at the production version of the Lexus NX compact crossover.
In the video recorded by AmericaJR, Lentz refers to the turbocharged LF-NX Concept that was on display at the Tokyo Motor Show, but comparing this image to our gallery from Tokyo, there are clear differences between the two vehicles. These include the toned-down shape of the spindle grille, lower fascia crease and door mirrors as well as a headlight design that more closely resembles that of the 2014 IS sedan and the newly introduced RC coupe. From what we can see of the rest of this image, the NX should retain some of the LF-NX's angular side body creases. The vehicle you see above basically looks ready for production.
If this is in fact the NX, then reports of a Geneva debut for the luxury crossover seem even more accurate. The entire video is posted below, but the NX comes on screen around the 10:40 mark.

Lexus builds final LFA supercar

Lexus has officially built the very last LFA. The 500th Lexus supercar rolled from the company's Motomachi facility on December 14th wearing all of the goodies of the Nürburgring package and white paint. Toyota's Lexus division started production on the car exactly two years ago on December 15, 2010 and built just one unit per working day. A total of 170 workers were hand-picked to handle parts manufacturing, assembly and painting for the LFA project. While Lexus has made it clear it will produce no more LFA models, lessons gleaned from the vehicle's construction may translate into other future products.
Specifically, Toyota says it may employ its carbon fiber reinforced plastic experience moving forward. As you may recall, the LFA made extensive use of CFRP and carbon fiber, and Lexus even created a special rotary loom to stitch together the supercar's A-pillars. Take a look at the brief press release on the last LFA below.

Lexus IS 250 to get new turbo four?

"All show, no go." That's how I described the 2014 Lexus IS 250 F Sport that you see above, when I reviewed it back in November. Don't get me wrong, there's a lot to like about the new IS, but the 204-horsepower, 2.5-liter V6 in the IS 250 is not on that list. In my review, I suggested that Lexus ought to get on the bandwagon of offering a small-displacement, turbocharged, four-cylinder engine in its base IS (like its rivals), and now the folks at Motor Trend are furthering that discussion.
Lexus pulled the wraps off its new NX 200t crossover at the Beijing show recently, and it'll be the first vehicle in the company's lineup to use a brand-new - you guessed it - 2.0-liter turbo-four. With 238 horsepower and 258 pound-feet of torque on tap, that represents a healthy increase over the 204 hp and anemic 185 lb-ft currently being offered with the 2.5-liter V6, and we imagine the fuel economy gains will be rather significant, too. For comparison, the Lexus' four-pot power numbers are very close to the 240 hp and 255 lb-ft offered in the same-sized engine that BMW uses in the 328i.
Motor Trend also posits that Lexus may consider changing the base IS' name from 250 to 200, or perhaps 200t, to properly reflect the new engine's displacement. Of course, that's assuming Lexus doesn't pull a BMW or Mercedes-Benz, and no longer has its alphanumeric names properly reflect the size of the powerplant found underhood.