2000 Lexus Gs300 All Leather! New Timing Belt! Power Roof! Clean! Es300 2001 02 on 2040-cars

Auto blog

Lexus NX rolls on wheels made of ice

To create this rolling ice sculpture, Lexus teamed up with London-based Hamilton Ice Sculptors, which fitted the compact luxury crossover with wheels and tires crafted from ice. The sub-zero craftsmen then deep-froze the entire vehicle, stored it at -22 degrees Fahrenheit, and drove it around London – pleasantly surprised to find that it started on the first try. As far as publicity stunts go, the finished product looks even cooler than the cardboard IS that Lexus had crafted a few months ago or the biometric glow-in-the-dark RC F from this past summer. The project took three months of research, design, and testing to carry out. The wheels replicate the alloys on the NX with millimetric precision, right down to the tread pattern, and each one took a team of four craftsmen 36 hours of work to complete. Of course, blocks of ice would have a hard time supporting the weight of the vehicle – especially while in motion – so the frozen wheels were reinforced with clear acrylic discs. And to make it all glow, they were also fitted with in-wheel LED lighting. This isn't the first time we've seen ice sculptors apply their skills to automobiles, following the frozen Canadian Tire pickup, Toyota Land Cruiser, Nissan Cube, and Saab Aero-X we've seen in recently years. But this one is at least as cool, in one sense or another. Scope out the results in the video above, and the process that went into their creation in the making-of video below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. LEXUS NX RIDES ON THE WORLD'S COOLEST WHEELS – CRAFTED IN SOLID ICE The concept of driving on ice has taken on a whole new meaning for Lexus, which has crafted the world's first set of working wheels and tyres made from frozen water. Brussels, Belgium - True to its mission of "creating amazing" and inspired by the craftsmanship that goes into every vehicle it makes, Lexus commissioned a team of ice sculpture specialists to explore how ice could be used in place of conventional alloy metal and rubber. After three months' research, design and testing, the finished wheels were fitted to a Lexus NX for the ultimate ice drive. The car itself was deep-frozen, stored for five days at -30°C (it started first time) before being driven off down a London road. The addition of in-wheel LED lighting added an extra dramatic dimension to the cutting-edge contemporary styling of the NX.

Toyota recalls 337,000 RAV4s and HS250h models for tie rod failure

UPDATE: The post has been updated with additional information from NHTSA. The Basics: Toyota is recalling 337,000 2006-2011 model year Toyota RAV4 crossovers built between October 31, 2005 and September 7, 2010 as well as 2010 model year Lexus HS250h cars built between July 6, 2009 and August 26, 2010. The Problem: When either an affected RAV4 or HS250h is given an alignment and the tie rod adjustment nut on the rear control arm isn't tightened properly, the threads on the tie rod can start to rust. If this happens, the nut may break off and throw off the alignment drastically and suddenly. This isn't a case of the car simply pulling to one side, either. This would seriously upset the balance of the car and could cause the driver to lose control and crash. This is also the third time these vehicles have been recalled for the same issue. Injuries/Deaths: It's unknown if this control arm issue has resulted in any injuries or deaths. Autoblog reached out to Toyota for more information, but a company representative told us that the company isn't able to discuss injuries or deaths caused by this issue (if any) at this time. Based on information from NHTSA documents, it does not appear that any crashes, injuries or deaths have been attributed to the defect addressed in the current recall. The Fix: The dealer will completely replace the rear suspension assemblies at no cost to the owner. The tie rods and nuts will also be coated in epoxy to prevent future rusting from occurring. According to Car and Driver, the previous recalls involved tightening nuts, coating decent tie rods in epoxy and completely replacing rusted ones. The car magazine reports that further complaints were filed and the company is now replacing all components regardless of condition. If you own one: Toyota will notify owners of affected cars by mail. Owners can also check whether their cars are affected by entering the VIN at safercar.gov/vin. Owners with questions can also reach Toyota customer service at 1-800-331-4331 or Lexus customer service at 1-800-255-3987. Related Video: Featured Gallery 2012 Toyota RAV4 View 16 Photos News Source: Car and Driver, Toyota, National Highway Traffic Safety AdministrationImage Credit: Toyota Recalls Lexus Toyota Safety lexus hs 250h lexus hs250h

Ever wonder how to really pronounce Japanese automaker names?

People tend to get very set in their ways when it comes to the pronunciation of words. Just look at the endless debates over whether or not to say the final 'e' in Porsche (which you should in terms of correct German enunciation). Or the argument about whether to follow the British convention and give the 'u' in Jaguar a special delivery or to say the 'ua' diphthong as more of a 'w' sound, as usually happens in the US.
This short video doesn't answer either of those automotive questions, but it does allow a native Japanese speaker to demonstrate the accepted pronunciations for several, major automakers from the country. One benefit is that it clears up the occasional debate over whether Nissan should be said with a long or short 'i' sound. Also, listen closely to how the female host says Mazda as Matsuda, the way it's actually said in the language. Even if this doesn't change the way you enunciate these brands, at least now you know the accurate way in Japanese.