2013 Range Rover Supercharged V8 1-owner Fuiji White With Ivory on 2040-cars

Auto blog

Who picks car colors and materials? Designers like Hannah Custance

As automotive journalists, we're often asked "how did you get that job?" People usually didn't even know you could do such a thing. In this 7 Questions series, we're highlighting other jobs in the automotive industry that you might not have heard about before. What do they do, how'd they get to do it and other questions about their particular corner of the car world. Slowly but surely, the automotive landscape is becoming more colorful. Look beyond the unrelentingly conservative palette of white, black and gray most buyers opt for and you'll see the increased use of exterior trim types beyond the usual chrome. There's gloss black, of course, but also other metallic finishes like gold or copper. Those can be found inside, too, where there's also an increase in colorful leathers and trims, innovative fabrics, new wood types and finishes, and greater creativity in general. So where is this change coming from? The answer is designers like Hannah Custance, the color and materials design manager for Jaguar Land Rover. Her team's latest effort is also its magnum opus, the 2022 Range Rover. Although saddled with the expectations that comes with one of the automotive industry's classic nameplates, the all-new Range Rover is also a celebration of cutting edge manufacturing and fashion-forward materials selection. We sat down with Hannah at the L.A. Auto Show to find out more about color and materials designers, how she ended up in the industry, and advice she might have for young designers out there. It has been condensed for brevity. Autoblog: What does a color and materials design manager to do?Hannah Custance: I basically look after a team of designers who design finishes for every A surface on the car. So, that could be exterior finishes. It could be interior trim materials, soft materials, hard materials, chromes, metals, woods, ceramic – that's one of the new ones – anything you can kind of touch and see is color material design. Autoblog: How early in the design process does your team become involved.Hannah: Right at the very start. In fact, we look at materials that don't have a product assigned to them or a car assigned to them. So, it takes actually a very long time for us to get materials approved and fully validated. We have to find suppliers that are willing to work in automotive and our test standards are incredibly high, some of the highest in the industry.

The UK votes for Brexit and it will impact automakers

It's the first morning after the United Kingdom voted for what's become known as Brexit – that is, to leave the European Union and its tariff-free internal market. Now begins a two-year process in which the UK will have to negotiate with the rest of the EU trading bloc, which is its largest export market, about many things. One of them may be tariffs, and that could severely impact any automaker that builds cars in the UK. This doesn't just mean companies that you think of as British, like Mini and Jaguar. Both of those automakers are owned by foreign companies, incidentally. Mini and Rolls-Royce are owned by BMW, Jaguar and Land Rover by Tata Motors of India, and Bentley by the VW Group. Many other automakers produce cars in the UK for sale within that country and also export to the EU. Tariffs could damage the profits of each of these companies, and perhaps cause them to shift manufacturing out of the UK, significantly damaging the country's resurgent manufacturing industry. Autonews Europe dug up some interesting numbers on that last point. Nissan, the country's second-largest auto producer, builds 475k or so cars in the UK but the vast majority are sent abroad. Toyota built 190k cars last year in Britain, of which 75 percent went to the EU and just 10 percent were sold in the country. Investors are skittish at the news. The value of the pound sterling has plummeted by 8 percent as of this writing, at one point yesterday reaching levels not seen since 1985. Shares at Tata Motors, which counts Jaguar and Land Rover as bright jewels in its portfolio, were off by nearly 12 percent according to Autonews Europe. So what happens next? No one's terribly sure, although the feeling seems to be that the jilted EU will impost tariffs of up to 10 percent on UK exports. It's likely that the UK will reciprocate, and thus it'll be more expensive to buy a European-made car in the UK. Both situations will likely negatively affect the country, as both production of new cars and sales to UK consumers will both fall. Evercore Automotive Research figures the combined damage will be roughly $9b in lost profits to automakers, and an as-of-yet unquantified impact on auto production jobs. Perhaps the EU's leaders in Brussels will be in a better mood in two years, and the process won't devolve into a trade war. In the immediate wake of the Brexit vote, though, the mood is grim, the EU leadership is angry, and investors are spooked.

Jaguar Land Rover backs Arc startup that sells $100,000 electric motorcycles

Before it even put its first motorcycle on the road, new startup Arc reeled in a major player to back its ambitious product plan. In conjunction with the reveal of the fully electric Vector superbike at the Esposizione Internazionale Ciclo Motociclo e Accessori ( EICMA) show in Milan, Jaguar Land Rover (JLR) announced it is placing capital in Arc, using JLR's investment company InMotion Ventures. Arc claims the Vector is the first all-electric motorcycle with integrated Human Machine Interface (HMI) to come to market. Arc, not to be confused with Keanu Reeve's Arch motorcycle company, has a pretty typical mission statement: "To use progressive design and technology to transform people's relationship with an automative experience. For us, for you, for our planet." At the core, Arc wants to make connected, clean, exclusive superbikes, and the Vector is its first try. Although Arc didn't get into the nitty gritty details about the make-up of the bike, it did give some surface specs and information. The bike's structure is built using a carbon composite to create a "unique Arc battery monocoque." Weight is also kept low using carbon fiber swing arms. There is no mention of the size or type of electric powertrain, but Arc claims it will have a highway range of about 120 miles or a city range of 170 miles on a single charge. Arc says it will be able to sprint from 0 to 60 miles per hour in 2.7 seconds and has a top speed of 124 mph. Stopping power comes from a Brembo brake system, while ride and handling relies on Ohlins dampers. The launch does not stop at the motorcycle, but includes gear, as well. The Vector links up with a jacket and a helmet for a fully connected experience. Partnering with U.K.-based impact protection design company Knox, Arc created the Arc Pilot System. Using audio, the armored Origin riding jacket provides haptic feedback based on numerous riding inputs to help keep the driver safe and aware. Furthermore, Arc linked up with luxury helmet maker Hedon to build the WiFi-connected Zenith helmet that houses an integrated projection heads-up display. In addition to showing things such as speed or battery life of the bike, the helmet uses a built-in rear camera to display other vehicles in the rider's blind spots. The rider can command the system using controls on the bike or via voice commands.