+ 2.0l Cd Front Wheel Drive Power Steering 4-wheel Disc Brakes Aluminum Wheels on 2040-cars

Auto blog

Kia Cross GT concept gives glimpse of future premium CUV

Kia is looking to bolster its premium-car lineup beyond newly conceived products like the Cadenza and Quoris. Perhaps the best evidence of this initiative, to date, is the Cross GT Concept that has just been unveiled at the Chicago Auto Show. Showing a larger, more premium crossover to slot in above the Sorento, the Cross GT Concept hints at a future product that could be what the ill-fated, body-on-frame Borrego never had a chance to be.
Compared to the current Sorento, the Cross GT Concept is 8.4-inches longer, 4.9-inches wider and rides on a wheelbase that is increased by 15.7 inches, and it shows a new possible styling direction for Kia as the automaker continues to attempt to venture up market. Some of the upscale styling cues include the clamshell hood. upright front end with signature Kia tiger nose grille and the multi-panel panoramic roof. The true luxury of the Cross GT is apparent inside where Kia has used real wood trim and rich leather on the seats, and there's also the buttonless, touch-screen infotainment system; rear occupants will have flat screen monitors with Internet access.
Based on a chassis shared with the rear-wheel drive GT Concept, which we first saw at the 2011 Frankfurt Motor Show, the fullsize Cross GT crossover is powered by a 3.8-liter V6 paired to Kia's hybrid system that gives the luxury crossover a combined output of 400 horsepower and 500 pound-feet of torque, as well as an all-electric driving range of 20 miles. The engine is paired to an eight-speed automatic transmission, which helps send power to the wheels through an advanced, torque-vectoring all-wheel-drive system

Kia calls in 87k Fortes over fan fire issue

An electrical issue on the 2014 Forte has prompted Kia and the National Highway Traffic Safety Administration to issue a recall for 86,880 vehicles across America. The problem stems from the resistor for the cooling fan that the Korean automaker has found could overheat and melt, which would increase the risk of a fire. And fires in an automobile, needless to say, are not a good thing – unless they're occurring inside a combustion chamber. The issue affects units manufactured between December 5, 2012, and April 17, 2014. Owners of said Fortes can expect to hear from Kia to arrange to bring their vehicles in to their local dealer to have the multi-fuse unit replaced – and, for those manufactured between December 5, 2012, and January 27, 2014, the cooling fan as well. Vehicles equipped with the 1.8-liter engine will also have their ECUs reflashed while they're at it. RECALL Subject : Cooling Fan Resistor May Melt Report Receipt Date: JAN 16, 2015 NHTSA Campaign Number: 15V015000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 86,880 Manufacturer: Kia Motors America SUMMARY: Kia Motors America (Kia) is recalling certain model year 2014 Kia Forte vehicles manufactured December 5, 2012, to April 17, 2014. In the affected vehicles, the cooling fan resistor may overheat and melt. CONSEQUENCE: If the cooling fan resistor overheats and melts, there is an increased risk of a vehicle fire. REMEDY: Kia will notify owners, and for vehicles produced from December 5, 2012 to January 27, 2014, dealers will replace the cooling fan resistor and multi-fuse unit. For vehicles produced from January 28, 2014 to April 17, 2014, dealers will replace the multi-fuse unit only. Owners of vehicles with a 1.8L engine will also have the engine control unit software updated. The recall is expected to begin February 24, 2015. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC113. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Kia U.K. builds a 420-horsepower Stinger GT track car

The Kia Stinger GT is an admirable sports sedan, er, hatchback, with 365 horsepower. But Kia's U.K. branch wanted more, leading to the 420-horsepower Singer GT420 you see here. As Kia explains, the car used to create this one-off track car is actually the first Stinger GT pre-production test car in the U.K. It was used for final testing, photography, and was even featured on Top Gear and The Grand Tour. Once its testing and publicity duties were over, though, it was slated to be crushed. But some delaying and the idea of building a track car saved it. To get it to its final output ratings of 420 horsepower and 413 pound-feet of torque, Kia (with help from Hyundai Motor Group's technical team in Germany) added a high-flow air filter, aftermarket exhaust without catalytic converters, an upgraded transmission cooler, and an engine tune. The car also benefits from weight reduction: The whole car was gutted, taking out everything unnecessary for speed such as the sound system, rear seats, carpeting, bumper supports and more. Even with the addition of a roll cage and extra chassis braces, the car is just over 330 pounds lighter than stock. Handling and stopping capabilities were also enhanced with stiffer springs and thicker anti-roll bars, along with six-piston brake calipers and brake cooling ducts up front. The car also gets visual changes in the form of a front splitter and rear spoiler and diffuser, plus the bold vinyl wrap. Naturally, this isn't a production car, especially with the gutted interior and emissions non-compliant exhaust. But looking at the list of modifications, it wouldn't be hard to replicate the Stinger GT420 on your own. In fact, someone could probably exceed the car's performance, since there are some areas ripe for upgrading Kia skipped over, such as upgrading the turbochargers. Your move, tuners.